Cisco Systems

Outbound Loadsharing between two DSL lines

Hi all We have a Cisco 1841 router with 2 FE interfaces, each connecting to an ADSL modem/router. The DSL lines are fro...

0 comments posted 18yrs

posted by nomail

0 comments posted 18yrs posted by nomail

ASA 5510 - port forwarding to external

We have a VPN into our colocation facility and need to enable the following scenarios for different vendors/clients. 1....

3 comments posted 18yrs

posted by NoSpamMgbworld

3 comments posted 18yrs posted by NoSpamMgbworld

Problem with ntp and time zone

On some 2960s, the time displayed is GMT, even though the time zone is set correctly. Cisco IOS Software, C2960 Softwar...

1 comments posted 18yrs

posted by joliver

1 comments posted 18yrs posted by joliver

1721 Maximum memory SDRAM

I have a 1721 with 32MB onboard. It will handle up to 128MB. If I put in a 128MB SDRAM will this work? IE will the extr...

2 comments posted 18yrs

posted by dehusk

2 comments posted 18yrs posted by dehusk

Aironet SSID question

Hi, is it possible to broadcast more than one SSID on a Aironet 1242AG? I'd like to broadcast two networks (separate vla...

1 comments posted 18yrs

posted by no-mail

1 comments posted 18yrs posted by no-mail

1801 + url-server (websense)

Hi, Is any one using 1801 with url-server (websense)? I can do it on my PIX 506: url-server (inside) vendor websense ho...

2 comments posted 18yrs

posted by lesniak81

2 comments posted 18yrs posted by lesniak81

Urgent Virus Issue > Block IP Address

we've got a virus infection and it keeps reinstalling a remote management tool , I've used some monitoring tools and ca...

3 comments posted 18yrs

posted by paul_tomlin

3 comments posted 18yrs posted by paul_tomlin

To QoS or load-balancing or both

Hi all We have a 1840 router with 3 FastEthernet interfaces connecting T1, DSL, and other DSL lines. The T1 is the defa...

2 comments posted 18yrs

posted by nomail

2 comments posted 18yrs posted by nomail

2811 router config- dissect

Whats the best way to get a better understadning of whats going on in this configuration of a 2811. I am trying to diss...

1 comments posted 18yrs

posted by glearng

1 comments posted 18yrs posted by glearng

1720 and SDM

The various Cisco literatures for the C1700 series of routers all seem to say that the 1710 doesn't do SDM but implies...

1 comments posted 18yrs

posted by dehusk

1 comments posted 18yrs posted by dehusk

subnetting

we have a 400 node network running on multple 3750 stackable switches at access layer and a 6509 at the core. We are ta...

4 comments posted 18yrs

posted by mmark751969

4 comments posted 18yrs posted by mmark751969

Spanning tree port cost (10 Ggps)

Which are the default spanning tree cost for the interfaces ( also for the 10 gigabit) ? Are there any different "inter...

0 comments posted 18yrs

posted by roberto.taccon

0 comments posted 18yrs posted by roberto.taccon

"%Key pair with hostname Company.companyname.com will be invalid"

Hi, I got this error when I tried to change hostname on PIX 501. I have discovered that pix uses host name and domain n...

2 comments posted 18yrs

posted by lesniak81

2 comments posted 18yrs posted by lesniak81

Solutions Fast Track - Monitoring and Intrusion

Dear Reader, Designing for Detection ---------------------------- - Get the right equipment from the start. Make sure a...

0 comments posted 18yrs

posted by arigano.spagety

0 comments posted 18yrs posted by arigano.spagety

2600 series router using SDM

Cisco 2615XM router with SDM 2.4.1 I'm trying to get PC's on a LAN to access a default gateway adsl router so they can...

11 comments posted 18yrs

posted by tg

11 comments posted 18yrs posted by tg