Cisco Systems

Throughput: Limited on Pix 506

Hello all, I don't know if this is the good place for this question. If not, please tell where to post. I actually own...

4 comments posted 17yrs

posted by ch.pin

4 comments posted 17yrs posted by ch.pin

Allow Cisco vpn client pool down a site to site VPN

Hi there, I was wondering if the following is possible? I am terminating a vpn client ( pool 10.10.10.0 /24 ) onto rout...

9 comments posted 17yrs

posted by andy.mas

9 comments posted 17yrs posted by andy.mas

ASA 5520 VPN client cannot ping inside network

Hello, I am hoping to get a quick answer as I suspect it is in the ACLs somewhere, but not versed enough in VPN to know...

4 comments posted 17yrs

posted by moranwa

4 comments posted 17yrs posted by moranwa

Easiest wireless access for via a 2611XM router?

Hi, I'm looking for some conceptual guidance. I have a 2611XM that I am using in a home lab. I=92d like to provide 802....

2 comments posted 18yrs

posted by john.heitmuller

2 comments posted 18yrs posted by john.heitmuller

Laptop NIC / vlan tagging / What's everybody use?

I'm looking at nic's that support 802.1q for some xp laptops. Pickings are pretty slim for non-wireless and reviews are...

4 comments posted 18yrs

posted by smfnj

4 comments posted 18yrs posted by smfnj

Small-scale Metro Ethernet

How viable is this solution? Poor Man=92s VPLS By Petr Lapukhov, CCIE #16379 http://blog.internetworkexpert.com/2008/01/...

0 comments posted 18yrs

posted by hackbac

0 comments posted 18yrs posted by hackbac

Cisco85x - ntp?

Is there no NTP support on the cisco 85x? Clock is wrong by half an hour each month :(

2 comments posted 18yrs

posted by spam2005

2 comments posted 18yrs posted by spam2005

setting dialer enable-timeout with dialer profiles

Is there any way to set the actual dialer enable-timeout when using dialer pools in 12.4(16a)? You can't apply it to th...

0 comments posted 18yrs

posted by ddl

0 comments posted 18yrs posted by ddl

access Access via PIX ?

Testing two methods of remote access to an MS Access backend; Terminal Server and VPN. So far VPN is ahead. Using Cisco...

1 comments posted 18yrs

posted by support

1 comments posted 18yrs posted by support

Migrating frame-relay to metro ethernet

Hi, We are in the process of migrating the frame-relay to a metro Ethernet network. Just wondering, will the migration...

1 comments posted 18yrs

posted by tchia60

1 comments posted 18yrs posted by tchia60

2960 connectivity issue

Just swapped a 2950 10/100 switch with a 2960 Gigabit switch. Our servers on the switch are Dell Poweredge (win2003) ru...

5 comments posted 18yrs

posted by noone

5 comments posted 18yrs posted by noone

Authentication Proxy

Hello On a Cisco 876 i set up an auth-proxy which works fine for accessing websites. Is it possible to block mail traffi...

6 comments posted 18yrs

posted by andre.wisniewski

6 comments posted 18yrs posted by andre.wisniewski

no Portfast in cisco 85x?

After every boot I have to wait for 10-30 seconds before I can ping the cisco 85x router and the internet. My port is sp...

14 comments posted 18yrs

posted by spam2005

14 comments posted 18yrs posted by spam2005

Switch Cisco vs. other vendor

Hi, Often during my job i have to justify the choice to buy a cisco instead of other equipment. Normally i search on go...

1 comments posted 18yrs

posted by guercio

1 comments posted 18yrs posted by guercio

esw_mrvl_pak_tx:

Does anyone know what the error message 'esw_mrvl_pak_tx:' means? I've tried to research it and have struck out so far....

1 comments posted 18yrs

posted by fatkinson

1 comments posted 18yrs posted by fatkinson