Latest threads in Cisco Systemsshow only best voted threads
| Subject | Author | Posted | Replies | |
|---|---|---|---|---|
|
|
vpn stopped working on ASA 5510
This is the famous: "I only pressed *that* button! *Not* *that* button". I've searched high and low including browsing through the last 8000+ posts in this group but haven't found anything which gave...
1
|
15 years ago
|
1 | |
|
|
CF Flash IOS/Config. question
I've gotten a bad batch of CF flash from Cisco... No biggie, cheap to replace. What would help is a different means of writing to the CF. Using a CF PCMCI slot on a PC would work really well. Has...
1
|
15 years ago
|
1 | |
|
|
Cisco PIX 515 configuration help
The below statements are what you have in place You already have POP access: +OK IceWarp 9.1.0 POP3 Fri, 25 Jul 2008 15:41:35 -04 and ftp U:\>ftp ftp> open To 68.16.146.91 Connected to 68.16.146.91....
11
|
15 years ago
|
11 | |
|
|
Nat Pool
Group, Cisco Pix 6.3(4). We have a vendor that is requiring us to connect vpn to their network to transmit data. This used to not be a huge deal, because out of a thousand users, we only had one end...
4
|
15 years ago
|
4 | |
|
|
ASA Question regarding VLANS and Firewalls.
I have a client that runs a managed office for 90 or so companies. The plan is to run each company on its own vlan using 3750 switches. The question is the firewall. Can you apply seperate fiewall...
2
|
15 years ago
|
2 | |
|
|
SSH Server behind PIX 515
PIX 514 V7.04 Hi, We have an SSH server running on Linux that sites behind our PIX firewall. Last week it stopped working, no changes to the PIX but a hardware failure on the SSH server. The disks...
6
|
15 years ago
|
6 | |
|
|
Cisco 1700 Router
I have configured my Cisco 1700 router to access the Internet through my Westell Model 6100 modem using a 1ENET WIC. I can ping my modem at 192.168.1.1 but I am unable to access the Internet through...
3
|
15 years ago
|
3 | |
|
|
esw_mrvl_pak_tx:
Does anyone know what the error message 'esw_mrvl_pak_tx:' means? I've tried to research it and have struck out so far. Fred
1
|
15 years ago
|
1 | |
|
|
An example of a device that uses PoE *and* runs at gigabits speed?
A collegue of mine insists that it is impossible for a port to have gigabit speed while simultaneously using 802.3af PoE. Can anyone please confirm or deny? There's a round of beers running on this...
13
|
15 years ago
|
13 | |
|
|
Kiwi Cat Tools
Hi, (sorry not exactly a cisco question..) We are using kiwi cat tools to backup the configs of our cisco gear, the box that cat tools is running on is in a dmz, to make life a lot easier I am wanting...
—
|
15 years ago
|
— | |
|
|
Cisco Secure ACS Solution Engine - Some windows services not started
I installed a new Cisco Secure Access Control Server Solution Engine yesterday. It is an appliance based on a hardened Windows Server 2003 with no access to the windows part. After I started the...
3
|
15 years ago
|
3 | |
|
|
San Francisco city network locked down
SAN FRANCISCO CITY SYSTEM ENGINEER LOCKS OUT ADMINS Various news sources report that an employee of the city of San Francisco's IT department had the only administration access into a FiberWAN system...
—
|
15 years ago
|
— | |
|
|
One way arp?
I've a network that involves multiple VLANs, so there is a lot of VLAN trunking going on. Up until now, this hasn't been a problem. But I'm now in a situation where two sets of systems are having a...
2
|
15 years ago
|
2 | |
|
|
1751V + VIC 2XFXS = ATA ?
I have an unused 1751V, with only a serial WIC and a VIC 2XFXS Can I use it as an ATA, to connect a SIP VoIP server to two analog phone ? There is a sample configuration file that I can modify ? I'm...
—
|
15 years ago
|
— | |
|
|
Outbound Loadsharing between two DSL lines
Hi all We have a Cisco 1841 router with 2 FE interfaces, each connecting to an ADSL modem/router. The DSL lines are from the same ISP (AT&T). Question 1. How can I loadshare outbound user traffic...
—
|
15 years ago
|
— |