Hi,
I bought a PIX 520 @ ebay, however, I could not do a password recovery
using a floppy as described @
Finesse Bios V3.3
Booting Floppy
...................................Execing flop
Also, it does not takes the Esc or Ctrl + Break to get to the monitor mode. I have tried with CRT version 3.4.6 and WINXP Hyper Terminal with 9600,
8, none, 1 setting.
I have copied and pasted startup screen and sh verion for your information:
Finesse Bios V3.3
Booting Floppy
Loading from Flash
128MB RAM Flash=AT29C040A @ 0x300 BIOS Flash=AM28F256 @ 0xfffd8000 mcwa i82558 Ethernet at irq 11 MAC: 0090.2710.49cf mcwa i82559 Ethernet at irq 10 MAC: 0090.27af.b59a
-----------------------------------------------------------------------
|| || || || |||| |||| ..:||||||:..:||||||:.. c i s c o S y s t e m s Private Internet eXchange
-----------------------------------------------------------------------
Cisco Secure PIX Firewall
Cisco Secure PIX Firewall Version 5.1(4)
Licensed Features: Failover: Enabled VPN-DES: Enabled VPN-3DES: Enabled Maximum Interfaces: 6
****************************** Warning
******************************* Compliance with U.S. Export Laws and Regulations - Encryption. : : (removed lines to save space) FARS sec. 252.227-7013. Cisco Systems, Inc. 170 West Tasman Drive San Jose, California 95134-1706 Type help or '?' for a list of available commands.
sh ver
Cisco Secure PIX Firewall Version 5.1(4) Compiled on Mon 02-Oct-00 07:19 by morlee Finesse Bios V3.3
pixone up 19 mins 14 secs
Hardware: SE440BX2, 128 MB RAM, CPU Pentium II 349 MHz Flash AT29C040A @ 0x300, 2MB BIOS Flash AM28F256 @ 0xfffd8000, 32KB
0: ethernet0: address is 0090.2710.49cf, irq 11
1: ethernet1: address is 0090.27af.b59a, irq 10
Licensed Features: Failover: Enabled VPN-DES: Enabled VPN-3DES: Enabled Maximum Interfaces: 6
Serial Number: 18020211 (0x112f773) Activation Key: 0x4d467e42 0x2bb81f00 0xf2f39bfe 0x4b977554
Can anyone point me in the right direction please?
Thanks, Suhi