Cisco PIX Firewall Version 6.3(4) Cisco PIX Device Manager Version 3.0(1) Hardware: PIX-515E
hi, ok, exporting works fine with:
write net []:
but how can I revert back to that config after i screwed something up, I would think that's the point of saving a config.
cheers, s
snipped-for-privacy@gmail.com schrieb:
ok, got it,
The configure net command merges the current running configuration with a TFTP configuration stored at the IP address you specify and from the file you name. If you specify both the IP address and path name in the tftp-server command, you can specify:filename as simply a colon (:).
For example:
configure net :
The following example shows how to configure the PIX Firewall using a configuration retrieved with TFTP:
configure net 10.1.1.1:/tftp/config/pixconfig
Cabling-Design.com Forums website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.