1. Home
  2. Cisco Systems
  3. How to tell if PDM is already installed on a PIX?

How to tell if PDM is already installed on a PIX?

I have a Cisco 515 running in failover and would like to know how to find out if it already has PDM already installed. I can see several pdm commands when I do a show command but the standard 'x.x.x.x

255.255.255.255 inside' and 'http server enable' information I configured doesn't get me anywhere when I try and connect via browser.
Reply to
fred.branham
Loading thread data ...

In article , wrote: :I have a Cisco 515 running in failover and would like to know how to :find out if it already has PDM already installed. I can see several :pdm commands when I do a show command but the standard 'x.x.x.x :255.255.255.255 inside' and 'http server enable' information I :configured doesn't get me anywhere when I try and connect via browser.

For PIX 6.x,

show flashfs

Then "file 3" is the pdm image. If the length is 0 then you do not have pdm installed.

Reply to
Walter Roberson

Make sure you connect using https (with the "s" at the end).

Reply to
you know who maybe

snipped-for-privacy@gmail.com schrieb:

"show version" should tell you if PDM is installed on your firewall appliance:

---------- pixfirewall# show version

Cisco PIX Firewall Version 6.3(5) Cisco PIX Device Manager Version 3.0(4) [...]

----------

Reply to
Martin Turba

Cabling-Design.com Forums website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.