1. Home
  2. Cisco Systems
  3. I have strange routing problem with my C3560 switch.

I have strange routing problem with my C3560 switch.

Hello

I have strange routing problem with my C3560 switch.

I can ping from my PC (10.94.200.9) to my cisco ge0/2 (10.94.200.10).

but I can NOT ping from my PC to cisco ge0/23.

And it is not a problem in the PC. The packet enters the router for sure (I can see it on vlan2001 using a analyzer, and also the inoput interface counters increase on the ge0/2).

Any ideas? I go crazy... Feels like this is the easiest setup that can be setup...

br Mats

-------------------------------------- PC1 eth0: 10.94.200.9

-------------------------------------- | | vlan 2001 |

-------------------------------------- ge0/2: 10.94.200.10

CISCO 3560

ge0/23: 10.94.250.130

--------------------------------------

The release of IOS is: [C3560-IPBASE-M, Version 12.2(25)SEE2, RELEASE SOFTWARE (fc1)]

Reply to
ervmapa
Loading thread data ...

Is the VLAN showing as up? Generally there has to be an 'up' physical interface in that VLAN for the VLAN itself to be up. Since you have a trunk configured, I would hope that the trunk is up and working and therefore the vlan is showing as up in sh ip int brief.

If all is well there, source a ping on the 3560 from one interface to the other.

Reply to
Trendkill

snipped-for-privacy@gmail.com crashed Echelon writing news: snipped-for-privacy@h3g2000cwc.googlegroups.com:

Are sure about above or just a typo, according to your configuration the VLAN2001 interface on router has 10.94.200.9 and not .10 as mentioned.

Reply to
Bjarke Andersen

Cabling-Design.com Forums website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.