1. Home
  2. Cisco Systems
  3. FLASH file is corrupted ,, is there a way to load a new file via rommon 1 >

FLASH file is corrupted ,, is there a way to load a new file via rommon 1 >

hi

i loaded an bad file to the flash of 3640 and now the system is stuck as the previous good files was erased and replaced with this corrupted file, is there a way to load a new file via the rommon pls advice

thanks

Reply to
voipcanada
Loading thread data ...

see

formatting link
command to use is tftpdnld

download a good image from CCO

verfiy the downloaded image checksum

use rommon command tftpdnld

Reply to
Merv

formatting link

Reply to
voipcanada

when i try xmodem it says following:

a038) getdirent: trouble reading simple flash file header

WARNING: All existing data in flash will be lost! Invoke this application only for disaster recovery. Do you wish to continue? y/n [n]: y Ready to receive file c3640-jsx-mz.124-8.bin ... BB0 ERR:Image size exceeds free flash space

all thought the file size is less than the total flash space Merv wrote:

formatting link

Reply to
voipcanada

Cabling-Design.com Forums website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.