FAX onramp (FAX to Mail Gateway)

Hi, I'm trying to configure a fax to mail service at my lab

I have seen at cisco as it is possible to transfer faxes over slow lines per smtp and as it is allso usable as fax gateway.

Now I have tried to configure this, as shown at config exaples of Cisco but with out any success. When ever I call to the FXO port 1/0/0 I got the fast busy signal When ever I call to the FXO port 1/0/1 I can dial 100 or 101 fine

It wold be grate if sommbody hs a idee what is todo or where I can search to the misstake?

How is it connected: voice-port 1/0/0 - fxo - POTS public Number voice-port 1/0/1 - fxo - POTS public Number to cheq redirection to the phones voice-port 1/1/0 - fxs - Phone 100 voice-port 1/1/1 - fxs - Phone 101

Hardware: IOS (tm) 3600 Software (C3640-JSX-M), Version 12.3(3a), RELEASE (fc2) System image file is "slot0:c3640-jsx-mz.123-3a.bin" cisco 3640 (R4700) processor (revision 0x00) with 94208K/4096K bytes

1 Ethernet/IEEE 802.3 interface(s) 2 Voice FXO interface(s) 2 Voice FXS interface(s)

Code snip Cisco 3640# ! hostname fax2mail ! ip domain name xxxxxx.ch ip name-server 217.xx.xx.xx ip name-server 217.xx.xx.xx ! ip cef ! voice call carrier capacity active ! fax receive called-subscriber $d$ fax interface-type fax-mail mta send server 217.xx.xx.xx port 25 mta send subject Fax2Mail from fax.xxxxxx.ch mta send with-subject both mta send filename both mta send filename both mta send mail-from hostname xxxxxx.ch mta send mail-from username fax2mail dial-control-mib retain-timer 1440 dial-control-mib max-size 500 ! call application voice onramp slot0:app_faxmail_onramp. ! ! FXO voice-port 1/0/0 ! FXO voice-port 1/0/1 ! FXS voice-port 1/1/0 ! FXS voice-port 1/1/1 ! dial-peer voice 99 pots application onramp incoming called-number . port 1/0/0 ! dial-peer voice 1 mmoip application fax_on_vfc_onramp_app out-bound destination-pattern 99 information-type fax session target mailto: snipped-for-privacy@xxxxxx.ch ! dial-peer voice 100 pots destination-pattern 100 port 1/1/0 ! dial-peer voice 101 pots destination-pattern 101 port 1/1/1 ! dial-peer voice 201 pots destination-pattern 0. port 1/0/1 ! gateway ! gatekeeper shutdown !

Reply to
Loading thread data ...

Cabling-Design.com Forums website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.