Hi
i have a Cisco 1760/IOS Voice. I have a card with 2 FXO port
Anyone have a configuration sample please ?
For connect this 1760 at my SIP Voice Serveur (Asterisk) without compression, best very best quality
Thanks for your help
Actually, they have:
voice-port 2/0 output attenuation -1 no comfort-noise connection plar opx 7145551212 description 71455551212 ! voice-port 2/1 ! ! ! ! ! ! dial-peer voice 1 pots destination-pattern . incoming called-number . port 2/0 ! dial-peer voice 100 voip preference 1 destination-pattern 7145551212 progress_ind setup enable 3 session protocol sipv2 session target ipv4:192.168.50.15:5060 session transport udp incoming called-number . dtmf-relay rtp-nte codec g711ulaw no vad ! sip-ua retry invite 3 retry response 3 retry bye 3 retry cancel 3 timers trying 1000 sip-server ipv4:192.168.50.15:5060 ! !