Running etherswitch module with ipservices image; it appears to not support NAT! What image supports NAT?
Etherswitch Module : nme-16es-1g + NAT + ipservices image
Jul 04, 2007
1 Replies
Works like this anyway.
c3845-adventerprisek9-mz.124-13c.bin NMD-36-ESW
interface FastEthernet2/0 switchport access vlan 24 spanning-tree portfast
... interface FastEthernet2/35
interface Vlan24 ip address 172.20.24.1 255.255.255.252 ip nat outside no ip virtual-reassembly
Would be surprised if it was a software Feature Set issue - all images will do nat - surely.
Join the Discussion
Have something to add? Share your thoughts — no account required.
Didn't find your answer?
Ask the community — no account required