Hardware is: NME-16ES-1G etherswitch-module (aka ESM) in a 3845 Chassis
Software is: c3750-ipservices-mz.122-25.SEE3.bin
12.2(25)SEE3 C3750-IPSERVICES-M
Problem is:
Traffic coming in from two different remote destinations needs to be "route-mapped" to different next-hops based upon the source network. The traffic arrives at the ESM from the 3845 router on interface Gig1/0/2, the "internal" interface, so I want to apply the route map with the "ip policy route-map" statement on that interface.
The Gig1/0/2 interface doesn't reject the "ip policy route-map" statement, but the configuration statement does not "stick". I suspect this may be an IOS feature-set type issue, does IPSERVICES-M support route maps???