Console Router X-Modem

~ We've got a Cisco 3640 we're using as an async console server. Is there any ~ way to perform an x-modem or xmodem 1K file transfer over it? I need to ~ upgrade a device using it as the console connection. ~ ~ Thanks in advance, ~ ~ -Jon Hartman ~

I've done it.

First set the 3640 line to 115200 bps if the target console port supports it.

Next open hyperterm and set it to talk to a IP address / TCP port rather than to a COM port or modem. The TCP port should be

Now do your xmodem.

(I THINK this should work; this was a few years ago.)

Aaron

That is crazy-insane... and it totally worked. I tested it and it worked beautifully.

Thank you for the information. :)

-J>