1. Home
  2. Cisco Systems
  3. Cisco 7200 as PPPoE server

Cisco 7200 as PPPoE server

I want to set up a small ISP system for demonstration purposes. As NAS I have a Cisco 7200 router. Because I don't have any real dial in hardware I thought about simulating DSL dial in by simply connecting a laptop as pppoe client to a Cisco ethernet port. The laptop should be configured as if it is connected to a normal DSL modem. As I'm a newbie in Cisco configuration, I'd like to ask two things:

  1. Is it possible at all to set up the c7200 to serve the pppoe directly without the DLSAM ... in the dialin network?

  1. If yes, how can it be done?

Thanks in advance Hanspeter

Reply to
Hanspeter Halle
Loading thread data ...

Yes.

Follow the configuration guide from cisco.com.

Reply to
Lutz Donnerhacke

That's what I tried before. But I did only find configurations for ATM interfaces, nothing for a direct ethernet connection between the client and the cisco.

Reply to
Hanspeter Halle

Drop the ATM part. Start with virtual-access for vpdn.

Reply to
Lutz Donnerhacke

Cabling-Design.com Forums website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.