1. Home
  2. Cisco Systems
  3. Cisco 2950 flash not initializing

Cisco 2950 flash not initializing

Dear all,

when i loading the Cisco 2950 Switch,i am getting following error.

" Loading "flash:c2950-i6q412-mz.121-22.EA8a.bin"...flash:c2950-i6q412-mz.121-22.E A8a.bin: no such file or directory

Error loading "flash:c2950-i6q412-mz.121-22.EA8a.bin"

Interrupt within 5 seconds to abort boot process. "

i have tried to loaded the new ios image (.bin file) in switch through xmodem.but if i am giving the "boot command",it takes normal boot & but restarting the switch automatically.it's comes to following prompt

" Flash_init load_helper boot

switch:

"

kindly provide me the suggestion to recover from this issue.

Regards, Mano

Reply to
Manoj
Loading thread data ...

Hi Mano,

You may wish to investigate:

Cisco Catalyst 2950 Series Switches Recovering Catalyst Fixed Configuration Switches from a Corrupted or Missing Image

formatting link
Hope this helps.

Brad Reese

formatting link

Reply to
www.BradReese.Com

Thanks a lot...i already did as per that guide.still i have the same problem.

Manoj

Reply to
Manoj

Is show boot the same as dir flash: ? It should be

>
Reply to
Martin Bilgrav

Cabling-Design.com Forums website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.