6509 Boots to Rommon

Oct 12, 2006 6 Replies
T

Gang, I have a 6509 IOS native that boots into rommon after we cycle it.



If I type "Boot" at the rommon prompt, everything comes up fine. Show Boot shows: BOOT variable = CONFIG_FILE variable = BOOTLDR variable = bootflash:c6msfc3-psv-mz.122-17d.SXB11.bin Configuration register is 0x102



Standby is up Standby has 458720K/65536K bytes of memory.



Standby BOOT variable = Standby CONFIG_FILE variable = Standby BOOTLDR variable = bootflash:c6msfc3-psv-mz.122-17d.SXB11.bin Standby Configuration register is 0x102



This started happening after I converted from CAT OS to IOS Dir sup-bootflash shows: s72033-jk9s-mz.122-18.SXD7a.bin



Any help would be great.



Vote
Twitter Facebook LinkedIn
B

You have your boot varible set to boot an invalid image. "BOOTLDR variable = bootflash:c6msfc3-psv-mz.122-17d.SXB11.bin"

The image in your flash is: "s72033-jk9s-mz.122-18.SXD7a.bin"

At the rommon prompt type: boot:c6msfc3-psv-mz.122-17d.SXB11.bin

After the system comes up correct your bootstring in your config

Vote
Twitter Facebook LinkedIn
T

Ok, Do I have the wrong images in the wrong spot?

In Dir bootflash: I see c6msfc3-psv-mz.122-17d.SXB11.bin

In Dir SUP-Bootflash I see s72033-jk9s-mz.122-18.SXD7a.bin

Do I have those images in the correct place? and my bootldr should be c6msfc3-psv-mz.122-17x.SX11.bin?

When > wrote in

messagenews: snipped-for-privacy@c28g2000cwb.googlegroups.com...

text -- Show quoted text -

Vote
Twitter Facebook LinkedIn
B

no one can answer that except you....what image is your prefered boot image?

Vote
Twitter Facebook LinkedIn
B

If you are sure thats the boot image you want.....

clear boot system flash bootflash:c6msfc3-psv-mz.122-17d.SXB11.bin boot system flash sup-bootflash:s72033-jk9s-mz.122-18.SXD7a.bin

sho ver will verify

Vote
Twitter Facebook LinkedIn

Join the Discussion

Have something to add? Share your thoughts — no account required.

Didn't find your answer?

Ask the community — no account required