Latest threads in CCTV, Alarms and other Physical Securityshow only best voted threads
Subject | Author | Posted | Replies | |
---|---|---|---|---|
|
Info on old Radionics Central Station equipment
Anyone here have any manuals, pictures, or other information on old Radionics central station equipment? Specifically the D6000 receiver and the software package they provided to monitoring stations....
3
|
2 years ago
|
3 | |
|
OT: Somebody Called the Sheriff On Me
If you don't want to read a rant. Stop right now and hit your kill key on this thread. This is a rant. Its also not alarm related. I was a licensed contractor for 23 years. Never had a complaint on my...
13
|
2 years ago
|
13 | |
|
connecting to Vista 50p from Compass
I can connect to panel and get through the security codes It starts uploading from panel and in segment one gives me a message CRC failed. What is this and how can I correct it? Bob Levy
1
|
2 years ago
|
1 | |
|
A real Brain Twister
Hey Guys!! I have been having a real challenge lately with a house with a Interlogix NX8V2. This is really one for the books but rather than type a not so small NOVEL I will focus on just one small...
17
|
2 years ago
|
17 | |
|
Installing Internet/WiFi and Ethernet wiring and doing the setup
What's goin on with everyone? . I've got a 2500 sqft single story house under construction. He's a builder and this is going to be their retirement home. All wiring is being brought back to a utility...
28
|
2 years ago
|
28 | |
|
Antiques
I was just cleaning out a file cabinet of old files I am no longer legally required to keep, and found where I dumped my modems. 2 Hayes 1200 10 switch (old FBII & DSC), 1 Cardinal 2400 (mostly...
9
|
2 years ago
|
9 | |
|
Wired pulse camera
Why is the tec telling me I have low voltage to the pulse and that is why it chirps all the system is wired http://time.the
3
|
2 years ago
|
3 | |
|
NX-591NE-GSM 4G
Am looking to purchase Cellular modules. I'm aware that Interlogix is out of business, but someone out there may have stock left on their shelves. If not, what alternative Cellular Module would you...
4
|
2 years ago
|
4 | |
|
This technology had been used as a weapon
Without a doubt, there are a lot of errors in this testimonial since it was translated by software. In 1990, I receive some technology in my body when two murders were blamed on me. I did not know the...
3
|
2 years ago
|
3 | |
|
The _________ Is Beeping
I have had customers tell me the ___________ is beeping in the middle of the night for no good reason. a) Keypad b) Window Contact c) Motion Sensor d) ____________ (other) e) All of the above
12
|
3 years ago
|
12 | |
|
Engineering/Quality Control/Stuff
> >> >>> I installed the very first commercial installation for Dish Network (in an Applebee's restaurant). I was a sub for a Muzak dealer at the time. I had plenty of mini dish experience and I kept...
2
|
3 years ago
|
2 | |
|
Honeywell Vista 20P system
Programmed hundreds of Vista-15P's and 20P's of that vintage and never ran into this issue, Honeywell unfortunately did not state what issues updates fixed only what new features they added One way to...
18
|
3 years ago
|
18 | |
|
Working in Mexico
As came up in one thread I have had a customer or two in Mexico. I won't get into all the technicalities of legally doing that. I'm sure it all changed anyway. It did a couple times over the course of...
4
|
3 years ago
|
4 | |
|
Power Cycle
Hey all, Has anyone used or installed a 120volt power relay that would allow for a 23 hour 59 minute on time and a 1 minute off time that would then repeat the cycle?? The desire would be to have a...
25
|
3 years ago
|
25 | |
|
Napco GEM-P9600 Strange Behavior After Power Outage
Lost power for extended period of time. Battery went dead. I have an Expansion Zone Module (EZM) and three partitions configured on the 9600. After power was restored, the following things are...
8
|
3 years ago
|
8 |