1. Home
  2. Digital Subscriber Line
  3. ROUTE, VPN and DSL

ROUTE, VPN and DSL

Hi, I'd want to trough a DSL-router in a transparent way, so I can use two VPN machines.

Local situation: router DSL: USR SURECONNECT 9105 WAN: 82.xxx.xxx.242 (fixed ip) LAN: 192.168.1.1

VPN+Router: IPCOP WAN: 192.168.1.254 (RED interfaces) LAN: 192.168.130.254 (GREEN interfaces)

I'd want, but I'm not so able to do since now, that when public IP is pinged (82.xxx.xxx.242), the packet reach IPCOP machine, so everything from WAN should goes to IPCOP.

The route table of DSL router is: Destination Gateway Genmask Flags Metric Ref Use Iface

82.xxx.xxx.0 * 255.255.255.0 U 0 0 0 atm49 192.168.1.0 * 255.255.255.0 U 0 0 0 br0 default 82.xxx.xxx.254 0.0.0.0 UG 0 0 0 atm49

I have access to the route table of DSL-router; how can I setup this "simple" static route I need?

Thanks Gianluca

Reply to
Gianluca_Venezia
Loading thread data ...

Not sure if I fully understand, but maybe you need a "net" route for

192.168.130.0/255.255.255.0 network using gateway 192.168.1.254 on br0
Reply to
David Efflandt
[cut]

Reply to
Gianluca_Venezia

Cabling-Design.com Forums website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.