Need help with two Linksys BEFVP41 routers.

I have searched and searched and I am not sure if I am able to do what I am trying to do.

OK, let me explain a bit. I have established a tunnel between two BEFVP41 routers through the internet. I want to route traffic through them for a couple of VoIP phones to a phone switch. The first issue is that the phone switch does not reside on the LAN side of either of the BEFVP41. It does reside on the network which is on the WAN side of one though. Here is the current network breakdown.

Internet --> Cisco Pix Firewall --> Cisco 3810 (192.0.1.x/ --> Cisco 3640 (192.168.1.x/ --> Linksys BEFVP41 (192.168.2.x/

The Cisco 3640 is the router through which my phone system is on the network. It has an ip address of The other side of the VPN tunnel is just the internet connection to the Linksys. Also, I am not absolutely sure if the topology for the placement of the Pix Firewall is accurate. I did not setup this network and I really know nothing about Cisco stuff.

Internet --> Linksys BEFVP41 (192.168.4.x/ --> IP Phones

I can establish the tunnel with no problems. I need to know if there is any configuration needed (or desired) on the Cisco routers and/or the Pix. Also, is there a way to establish a static route from the Linksys BEFVP41s through the tunnel on either end? So that I can route the IP traffic from the IP phones to the IP address? Any help would be greatly appreciated!


Reply to
Trousle Undrhil
Loading thread data ... Forums website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.