Latest threads in CCTV, Alarms and other Physical Securityshow only best voted threads
Subject | Author | Posted | Replies | |
---|---|---|---|---|
|
I'm on a search too!
Been trying to find a camera. A 1080P HD over coax eyeball, white, fixed 2 to 3 mm lens, outdoor with IR about 50 to 75 feet, day night, good back lig ht and WDR 12VDC WITH A MATCHING WHITE COLOR BACK...
8
|
8 years ago
|
8 | |
|
On another search
Hey guys, Anyone remember the Sentrol 6155CT Cold Temp Motion Detector?? I may be in need of one but it seems it is no longer available. Any one know if there was a replacement or what would be a good...
4
|
8 years ago
|
4 | |
|
lightning rod protection system
I am looking for an installation company that can install a lightning rod protection system for a home
7
|
8 years ago
|
7 | |
|
SA4142-2AD2 Keyswitch
After a service call i came across an old legacy sa4142-2ad2 panel. I want to arm the system with keyswitch from panel's zone 3. I programm zone 3 as 21 (away arm) but cannot save my selection (21)....
6
|
8 years ago
|
6 | |
|
best "value" IP camera?
I'm looking for the best bang-for-the-buck outdoor IP cameras. I already have good quality poe routers, cables, computer interface cards. Ideal camera characteristics: 1) outdoor rated 2) day/night 3)...
—
|
8 years ago
|
— | |
|
Navigator Reporter Software
We currently are using a Honeywell Fire Alarm System that has a 4100SM hooked up to an Ademco control panel. The 4100SM has a serial cable connected to a serial printer that prints the event log. We...
1
|
8 years ago
|
1 | |
|
pc 1550 need to reset after disconnecting sensor and then connecting
I disconnected a glass break sensor and then reconnected it, zone light stays on, I need to reset system.
1
|
9 years ago
|
1 | |
|
how do I do a factory reset on GE Caddx NX4 security system
I inherited a GE Caddx NX4 system not operational. Replaced the battery and installed new contacts on all doors. Everything was in order and looked fine. Then I got a code from the previous owner but...
2
|
9 years ago
|
2 | |
|
Bunker Hill - Yes Really
Had somebody call me this morning (twice actually) because they installed a Bunker Hill system and then couldn't get it to work. I told them to call Bunker Hill for support. I didn't want to stand...
2
|
9 years ago
|
2 | |
|
Callback failure how do I correct this.
Entrapass corp 6.00
1
|
9 years ago
|
1 | |
|
Edwards Fire Alarm
Hey you guys!!! I have a customer that just removed an old Edwards Fire Panel. Well not sure it should be called a "Panel" but it is a Edwards. Never saw one like this before. May have been installed...
3
|
9 years ago
|
3 | |
|
DSC 5108
Does anyone knows how many meters away from control panel can work 5108 zone expander? Thanks in advance!
3
|
9 years ago
|
3 | |
|
DSC PC1616 handshake error (2023 Update)
Any idea about DSC PC1616 v4.5? It cannot make handshake on residential dial format... I tried all the international settings for telephony, but still the issue remains.... thanks in advance!
6
|
9 years ago
|
6 | |
|
Removing the NAPCO MA1000e System
I've purchased a home with the NAPCO MA1000e security system installed. I've not subscribed to any monitoring service. Earlier today I came home and the alarm went of - first time this has happened...
5
|
9 years ago
|
5 | |
|
Firelite Firm ware upgrade suggested
Fire-Lite Panels Suggested Firmware Upgrade Document: FLSB15-1-1 Fire-Lite Alarms has identified a firmware issue that could potentially aff ect the operation of the Signaling Line Circuit (SLC) when...
—
|
9 years ago
|
— |