RSQ's

Sounds like the FG was set in a latching mode to me. Not familiar with that particular sensor. I've had clients who wanted GBs as 24hr or 24hr trouble with alarm when armed.

That's not the problem, Bob. The latching mode on the FG-730 only affects the LED -- not the alarm relay.

I installed hundreds of them. They've been around for a long time. The newer models (FG-1625 series) are more popular. You might want to give them a shot. There's an FG-1625RFM (for "Round Flush Mount") that fits in a small hole in the wall or ceiling. The visible part is a white disc not much bigger than a quarter. Clients love them because they're practically invisible compared to standard models.

I've had similar requests but I usually recommend they program glass breakage detectors as Interior or Perimeter with Bypass enabled.

I disagree. I teach clients to program that panel every week. These are invariably first-time DIYers (experienced DIYers rarely need any help). The software is simple to follow. It takes you through all of the screens, one at a time, until you reach the zone configuration. That part is a snap with the current release. The customer types in simple descriptions of each zone, like "Marys Bedroom", "Left Window". Then he clicks in the box and selects "zBurg Perimeter" or whatever from a drop-down list of zone types.

It normally takes me between 20 minuts and an hour (occasionally longer) to teach a newbie how to use the Napco Quickloadr program.