Is it possible to reduce the sensor detection angle down from 180 degrees? I would like to reduce (or block) one side about 50 degrees but do not know if it is possible or how to do it. Thank you.
- posted
15 years ago
Motion security lighting question
Loading thread data ...
- Vote on answer
- posted
15 years ago
Not too permanent, but just put some electricians tape over the portion of the lens that you don't want to sense motion. A piece of heavy plastic or anything solid will do it also. If you can easily get inside the unit, masking is more permanent when applied to the inside of the unit/lens.
- Vote on answer
- posted
15 years ago
mask it on the outside of the lens, when you have the mask the way you want it, remove the cover and mask it from the inside and remove the tape from the outside.
masking tape, elec. tape,
- Vote on answer
- posted
15 years ago
Thanks for the replies. I appreciate the help. I contacted the manufacturer before posting here and was told it can't be done.
- Vote on answer
- posted
15 years ago
What the hell do THEY know?