Adding an Ademco 5881ENM wireless receiver to my Vista 15P. All of the documentation shows 4 wires connecting between the receiver and the panel. However, the receptacle on the receiver has 5 pins and the plug has 5 wires, not 4. Green wire appears to be pin 1, black pin 2, red pin 3, blue pin 4, yellow pin 5, do I simply ignore the blue wire pin 4 on the receiver?
Bob
Yep ignore it.
4, | yellow pin 5, do I simply ignore the blue wire pin 4 on the receiver? | | Bob | | |Consider it a Belgian RFI drain wire :-))))))...inotherwords...useless...don' do nuttin.
| >
| >
| >
| |
its for the future they claimed .. ;-)
Don't forget to install BDC 5881BS ... Belgian Drip Can, otherwise the floor under the panel will get stained.
| >
| I drilled a hole in the bottom of the can and attached the wire above it. | Now when the wireless Belgian bs overflows, it'll drip out the bottom of the | can instead of impeding wireless transmission. :-)) | | Bob | | | |
Have you tried DSC directly?
| > Bob | >
| | |
OK, Thanks,
Bob
I drilled a hole in the bottom of the can and attached the wire above it. Now when the wireless Belgian bs overflows, it'll drip out the bottom of the can instead of impeding wireless transmission. :-))
Bob
dunno,,,maybe but I've never used it...structions say to not connect it..there isn't anywhere to connect it to I dont think.
| >
| > | >
| > | I drilled a hole in the bottom of the can and attached the wire above | > it. | > | Now when the wireless Belgian bs overflows, it'll drip out the bottom of | > the | > | can instead of impeding wireless transmission. :-)) | > | | > | Bob | > | | > | | > | | > | | >
| >
| |
Hi guys , I 'm looking into import DSC products into Australia .Do you know any wholesalers? Thanks Sam.
That's exactly what it's for.
Have something to add? Share your thoughts — no account required.
Ask the community — no account required