Linksys RV082

17 discussions on Cabling-Design.com Forums about the Linksys RV082: what owners asked, what went wrong, and what fixed it.

What owners report

Networx NX-590-E

Hello all,Installing my first NX590 to a NX8 v2 and was wondering if anyone here has set up one of these??If someone has I would like to converse, otherwise I won't bore everyone with my experience.Thanks,Les

Linksys EZXS16W Switch + BEFSR11 Cable/DSL Router Problems

If I am posting in the wrong group, please let me know.I have a Linksys BEFSR11 Cable/DSL Router. Up until yesterday, I wasusing a Linksys EFAH08W 8-port hub to share this connection to severalcomputers. That worked fine.I am planning to...

Need recommendations for firewall router.

Would like to get a router to connect a simple two-computer homenetwork using a Ethernet DSL modem. Primarily concerned with security;not port jacks or ease of setup. So what's a good, cheap router thathas robust firewall / security...

Cisco equivalent of RV082

I'm looking to setup dual load-balanced T1s for a company with QoS. I foundthe Linksys RV082 that has 2 WAN ports, but I need to be able to have 2isolated LANs instead of the 1.Is there a small-business Cisco equivalent to the Linksys RV...

Very small business router

Can someone recommend a small router that can support at least threeL3 VLAN's and a single WAN port? We are looking at an inexpensiverouter that we may be able to add to our product.Thanks in advance!

Cisco for load balancing w/o BGP

I'm wondering if any of you are familiar with a Cisco product that provides outbound load balancing over several links w/o using BGP.Basically, Cisco's equivalent to:- Linksys RV082: SonicWall PRO 3060: And the like...I figure that, since...

All discussions