Re: H.323: How to register GW without prefix?
Just register with an alias address and leave GatewayInfo empty
41 discussions on Cabling-Design.com Forums about the Cisco AS5300: what owners asked, what went wrong, and what fixed it.
Just register with an alias address and leave GatewayInfo empty
Hi,I've got a Layer 2 problem. I have a 'Fractional' E1 (15 lines) that Ineed to configure for dial-in to a cisco AS5300.My telco is very useless as I am in Mozambique. They can't even tell methe switch-type, but can only say it is 'the...
Hi,I'm using an AS5300 with 8E1/PRI Card and a Cisco 1721 with aVWIC-2MFT-G703. I tried to set a multilink connexion between them.The Problem is that When they are on HDLC encapsulation, both Serial onthe 1721 are up but when I set...
How can I capture a text plain with CISCO AS5300?
Is it possible to have one leg of a call on a Cisco AS5350 SIP using g711 and the second leg H323 using g729. Can the Cisco transcode from g711 to g729 and vise-vera and can the Cisco support on leg H323 and the other SIP. How would I setup...
In the case of studyã explained like connecting from PC-Modem with a AS5300 using PPP toaccede to a Local NETWORK.My question is if the opposite way is possible, that the AS5300 callsto PC-Modem so that this accedes to the LOCAL NETWORK.My...