Cisco Systems

  1. Home
  2. Cisco Systems
14705 Threads Posts
to

Worth reading in Cisco Systems

NAT Problem

I am trying to do a simple NAT translation so that I can have a web server running on port 8000 that appears as a publi...
2 comments posted 21yrs
posted by Thread7
2 comments posted 21yrs posted by Thread7

Qos / TOS Confguration

Hi guys and girls! I wish to prioritise VOIP traffic generated from our internal network and directed out our ADSL 256/...
3 comments posted 21yrs
posted by please_reply_to_newsgroup
3 comments posted 21yrs posted by please_reply_to_newsgroup

DECnet over GRE tunnel with serial interface

All, I need help. We have some terminals with one server which run DECnet. They all reside in the same area (area 1). T...
1 comments posted 21yrs
posted by parislubis
1 comments posted 21yrs posted by parislubis

PIX 501 - question

I have office and remote site both sides i have cisco pix 501 I want to create VPN site to site (pix to pix) and VPN ac...
4 comments posted 21yrs
posted by mor_feusz
4 comments posted 21yrs posted by mor_feusz

Cisco 2811 Easy VPN issue

I have set up a 2811 with a DSL interface (BT) and have FE/0 attached to the local lan 192.168.0.0/24. I have been thro...
2 comments posted 21yrs
posted by DaveMeekums
2 comments posted 21yrs posted by DaveMeekums

Basic Cisco Switch Tutorial

The following should be sufficient to enable you to set up a Cisco Switch. If you need anymore information please come...
0 comments posted 21yrs
posted by gary
0 comments posted 21yrs posted by gary

IPSec

Hi All I have set up a tunnel between 2 IOS Routers A and B (1760 and 1841). A has a single FastEth interface, and B 2...
3 comments posted 21yrs
posted by jks_bcn
3 comments posted 21yrs posted by jks_bcn

Cisco Pix 501 Problem with Cox Cable

I have a pix 501 and cox business cable at my house. I have a static IP address, which works on my computer just fine,...
1 comments posted 21yrs
posted by gleathers
1 comments posted 21yrs posted by gleathers

PIX501: block non-authorised MAC-addresses

Hi all, I'm looking for a way to block all acces from non-authorised MAC-addresses, even to obtaining an IP-address from...
2 comments posted 21yrs
posted by s.brozius
2 comments posted 21yrs posted by s.brozius

BGP notification hold time expired

Hi, I have 2 eBGP peers over a 64k leased line. One of the peers, say router A periodically sends a BGP notification of...
2 comments posted 21yrs
posted by test_nospam
2 comments posted 21yrs posted by test_nospam

PIX 501 Basic Configuration

I have just been given a PIX 501 to configure and have very little knowledge of CISCO routers. Apologies if I do not ex...
3 comments posted 21yrs
posted by davidpirie
3 comments posted 21yrs posted by davidpirie

No DHCP ststs on 2600

My 2600 router is configured as a DHCP server - it is allocating addresses as expected but: Router#show dhcp lease Rout...
2 comments posted 21yrs
posted by nedtrilby
2 comments posted 21yrs posted by nedtrilby

Diagnostic IPSec-related IOS command

Hi all, does IOS 12.3 feature a command which let me know how many VPN Client are connected (using XAuth mode and AAA r...
0 comments posted 21yrs
posted by ciao
0 comments posted 21yrs posted by ciao

2611 routing performance

Hi there, I currently own a Cisco 2611 router and plan to purchase a 10MB pipe from my ISP. I am a bit concern on the m...
2 comments posted 21yrs
posted by jchanwh
2 comments posted 21yrs posted by jchanwh