Cisco Systems

  1. Home
  2. Cisco Systems
14705 Threads Posts
to

Worth reading in Cisco Systems

HTTP Inspect

The http inpection engine on my routers is causing extremely slow opening of web pages from a necessary web site ( as l...
0 comments posted 20yrs
posted by stormrunner'_removethis'
0 comments posted 20yrs posted by stormrunner'_removethis'

Tunnels up, no esp sas

Pix 515e and 501. v6 Already have multiple tunnels between the 515 and other 501s. Seems like every time I add a new on...
1 comments posted 20yrs
posted by ssrjazz
1 comments posted 20yrs posted by ssrjazz

Setting up a router behind the PIX 501

I am setting up a router behind the PIX 501. I will use a Linksys router and I will have a switched hub hooked up to it...
2 comments posted 20yrs
posted by jenn.stevens
2 comments posted 20yrs posted by jenn.stevens

PIX with three interface and one public IP

hi, i've a problem with this scenario: pix515e, three interface: inside, outside, dmz only one public IP: pppoe i need...
3 comments posted 20yrs
posted by c.ditters
3 comments posted 20yrs posted by c.ditters

PIX VPN Issue

Anyone, I have similar issue to yours how did you solve yours. My PIX is talking to a Nokia Fw. Nov 11 10:52:54 -fw01 N...
0 comments posted 20yrs
posted by virtualmem12345
0 comments posted 20yrs posted by virtualmem12345

port access

Hi, If I want to open a port on a C837 and only allow certain IP addresses in, and only allow outgoing traffic through...
2 comments posted 20yrs
posted by SW
2 comments posted 20yrs posted by SW

Need co-location advice [San Diego]. Verio sucks.

Hi there, I'm looking for advice on a good co-location provider in the San Diego area. I've been using Verio for years....
0 comments posted 20yrs
posted by ghetto
0 comments posted 20yrs posted by ghetto

Cisco VXR 7200 - Unable to get full duplex link

Hi, I have a Cisco VXR 7200. I have several 100Base TX module cards in it. All of them are running at full duplex/100,...
8 comments posted 20yrs
posted by matth
8 comments posted 20yrs posted by matth

3750 Error disabled ports from loopback??

Hi all, Was are seeing certain FastEthernet ports on our 3750 switches going into error disabled mode. According to Cis...
7 comments posted 20yrs
posted by thefunnel
7 comments posted 20yrs posted by thefunnel

resetting just one VPN connection

We have our Cisco router hosting VPN to 3 external facilities which use Symantec VPM devices - every so often the conne...
1 comments posted 20yrs
posted by paul
1 comments posted 20yrs posted by paul

site to site vpn with internal NAT

Hello. I have a PIX 501. inside network = 192.168.1.0 255.255.255.0. I need to create a site to site IPSEC VPN through...
2 comments posted 20yrs
posted by meni.milstein
2 comments posted 20yrs posted by meni.milstein

Cisco VPN Concentrator NATing

Ok here is the setup, I have a current VPN tunnel established to another company using some other type of VPN appliance...
0 comments posted 20yrs
posted by crawl
0 comments posted 20yrs posted by crawl

OWA with Cisco VPN 3000 webclient

Hi There! I've been working with the webclient part of the cisco VPN. I've got things working fine if I use the SSL web...
0 comments posted 20yrs
posted by derek.boczenowski
0 comments posted 20yrs posted by derek.boczenowski