Cisco Systems

  1. Home
  2. Cisco Systems
14705 Threads Posts
to

Worth reading in Cisco Systems

Error Info Code: 3627 Copying new IOS images

Hello Have anybody known problem with upgradeing IOS on 2950 switch using ciscoworks RME? In my case i have following r...
1 comments posted 20yrs
posted by m_rzepecki
1 comments posted 20yrs posted by m_rzepecki

Webvpn.

Hi all, I found on a 871-K9 upgraded to SEC feature a section concerning wepvpn as default configuration. Cisco's site...
1 comments posted 20yrs
posted by am
1 comments posted 20yrs posted by am

IP SLB on 6500 series

Hello all, Having trouble with slb. A server keeps cycling from operational to failed and back again ... over and over...
1 comments posted 20yrs
posted by c
1 comments posted 20yrs posted by c

PIC 501 Redirect IP

Hello I have 2 PIX 501 i want to move 1 emial server from 1 place to another can i redirect IP? for example old IP was...
4 comments posted 20yrs
posted by mor_feusz
4 comments posted 20yrs posted by mor_feusz

Problem with Cisco Content Switch.

Hi all, we have a CCS configured. On it there are 2 webservers configured and they run a lot of dynamic pages. I noted...
0 comments posted 20yrs
posted by am
0 comments posted 20yrs posted by am

Cisco 837 ethernet0 half-duplex

Hi, all, When I plug in a Cisco837 router into the swich, it gives me a warning message: CDP-4-DUPLEX_MISMATCH: duplex...
7 comments posted 20yrs
posted by wxu3000
7 comments posted 20yrs posted by wxu3000

blocking Bittorrent

Hi all, I do want to know that how can i set my Linksys router to block the bittorrent for monopolizing the bandwidth....
3 comments posted 20yrs
posted by bytesurfer
3 comments posted 20yrs posted by bytesurfer

PIX 515e w/ 7.0(4) from 6.3 - No more PPTP?

I've Upgraded my PIX 515e from 6.3 to 7.0(4) and All of the Config looks good but the PPTP. I do not see much documenta...
2 comments posted 20yrs
posted by scott-i
2 comments posted 20yrs posted by scott-i

HSRP on multilayer switches

I have a gigabit MAN connection between two buildings that acts like an ethernet bridge. Connected to each end of this...
4 comments posted 20yrs
posted by fred.damstra
4 comments posted 20yrs posted by fred.damstra

cisco 806 router

Has anyone worked with/setup a cisco 806 router? Maybe show a copy of your config.. Thanks
0 comments posted 20yrs
posted by njkat
0 comments posted 20yrs posted by njkat

show port-security invalid

Why do I get an invalid invalid input response when I'm in the terminal privileged EXEC mode and do a show port-security...
1 comments posted 20yrs
posted by TexasMirty
1 comments posted 20yrs posted by TexasMirty

DMZ pix outside

Hello, I guess this setup is getting too convoluted as I cannot seem to find the problem. For some reason i cannot seem...
10 comments posted 20yrs
posted by ncointepoix
10 comments posted 20yrs posted by ncointepoix

NAT/PAT + Internet connection

Hi everyone, Here is my problem : I've 3 routers (2600 series) : 2 x (2 serials + 2 ethernet) 1 x (2 serials + 2 ethern...
1 comments posted 20yrs
posted by franck_richart
1 comments posted 20yrs posted by franck_richart

timestamp ICMP ?

Hello everyone ? I'm curious about exactly what softwares use timestamp ICMP messages. Here is what I read: ...Hosts on...
1 comments posted 20yrs
posted by jh3ang
1 comments posted 20yrs posted by jh3ang

DDR Prevent modem redialing after link failure

Hi all, I have a modem configured to access the Internet via async interface. I'm using DDR and was wondering if there...
5 comments posted 20yrs
posted by bhalicki
5 comments posted 20yrs posted by bhalicki