Cisco Systems

Cisco 871 as replacement for Fortigate 60

This is my first post to this newsgroup, as I have never bought Cisco items for my own site before. Basically, I'm reti...

9 comments posted 16yrs

posted by hankvc

9 comments posted 16yrs posted by hankvc

WS-C1924C-EN Firmware

Hello folks, I (still) have a bunch of 1900 series Catalyst switches, they are destined for charity and when I was chec...

9 comments posted 16yrs

posted by teunkloosterman

9 comments posted 16yrs posted by teunkloosterman

monitoring traffic cisco 2600 router

cisco 2651XM router IOS: c2600-adventerprisek9-mz.124-15.T9.bin WIC-1-ADSL card fitted (Dialer0) I'm using the monitor...

5 comments posted 16yrs

posted by nospam

5 comments posted 16yrs posted by nospam

snmp - determine hsrp

Hi, Anyone know what OID should be used to determine if an interface IP address is a HSRP address? In the case that the...

3 comments posted 16yrs

posted by QoS

3 comments posted 16yrs posted by QoS

871W (800 series) WiFi setup of WPA2

Pardon my newbiness, but I am at wits end. I have an 871W. IOS 12.4(15) T9 I got WPA to work fine with a MAC (OSX 10.5...

1 comments posted 16yrs

posted by jfmezei.spamnot

1 comments posted 16yrs posted by jfmezei.spamnot

Program to show what's attached to network switches cammer.pl -> cammer_c.pl

In case someone else finds this useful here is a Perl program to report on the devices attached to network switches. It...

2 comments posted 16yrs

posted by james.harris.1

2 comments posted 16yrs posted by james.harris.1

When is RELOAD not the same as a power off/on?

Hi Folks, A generic question here. At a remote site I recently had a BRI issue for a Cisco Call manager (4.1) Voice to...

0 comments posted 16yrs

posted by SOMEONE

0 comments posted 16yrs posted by SOMEONE

Pull Configs for a series of Switches with TFTP

Hello, I have inherited a problem or potential problem. We have not been very good at backing up our switch configurati...

6 comments posted 16yrs

posted by kdawg44

6 comments posted 16yrs posted by kdawg44

Is Cisco still in the VoIP business?

The reason I ask is because after buying many ATAs and VoIP from Linksys, I am surprised (and orphaned) because such pr...

5 comments posted 16yrs

posted by ramon

5 comments posted 16yrs posted by ramon

Media Convergance server VIC

I have a MCS-7825H-3.0-Server and wish to add a UK spec PSTN interface via a VIC module. Anyone know what the part or mo...

2 comments posted 16yrs

posted by marsden167

2 comments posted 16yrs posted by marsden167

Clear Lines via SNMP

Does anyone know how to clear a tty line via SNMP? I tried using the tsClrTtyLine Oid but I always get -1 as a response...

2 comments posted 16yrs

posted by brandon

2 comments posted 16yrs posted by brandon

c1800 and 100mb

We have two racks at a colocation and both are about 3/4 full. They have mail/file/app servers and 3 c1800's. There is...

4 comments posted 16yrs

posted by mmark751969

4 comments posted 16yrs posted by mmark751969

Cisco 2821 ISR - Public & Private NAT access

Hi there, I was wondering what the best method of securing the following situation is: I have a Cisco 2821 ISR - config...

3 comments posted 16yrs

posted by jbaker

3 comments posted 16yrs posted by jbaker

UNSUPPORTED_EXCHANGE_TYPE message when forming VPN tunnel

When I try to initiate a VPN tunnel between my ASA5510 and a remote VPN device, I get this message: Received an un-encr...

1 comments posted 16yrs

posted by ttripp

1 comments posted 16yrs posted by ttripp

ASA Phone Proxy and conference calls

Does any one know if conference calls are not supported on remote phones connected through an ASA phone proxy? I have a...

2 comments posted 16yrs

posted by jgmitchell

2 comments posted 16yrs posted by jgmitchell