Cisco Systems

  1. Home
  2. Cisco Systems
14701 Threads Posts
to

Worth reading in Cisco Systems

Performance problem 2950

Hi, since 4 weeks we have much trouble in our mixed switched network. We have Cisco 2950, 2960 and Enterasys VH124-24 s...
16 comments posted 19yrs
posted by hk13
16 comments posted 19yrs posted by hk13

Gigabit Throughput

Hello What measured speeds do people achieve over Gigabit Ethernet Switched LAN? Is it possible to achieve 1 gbps link...
2 comments posted 19yrs
posted by yashpal.chouhan
2 comments posted 19yrs posted by yashpal.chouhan

PIX site-to-site VPN

Internet / \\ 11.11.11.11 22.22.22.22 ADSL Router ADSL Router 10.0.11.254 10.0.0.22.254 | | 10.0.11.1 10.0.22.1 PIX 506...
11 comments posted 19yrs
posted by nicough
11 comments posted 19yrs posted by nicough

Help Optimizing my Growing LAN

Our network has been rapidly expanding over the past 12 months, and what was once a blazing fast network is being bogge...
1 comments posted 19yrs
posted by seanmcwherter
1 comments posted 19yrs posted by seanmcwherter

Basic Router config - no acl just rip

If you have a network of cisco routers (800 series), with minimal information & working in a RIP environment. Theres no...
2 comments posted 19yrs
posted by nonono
2 comments posted 19yrs posted by nonono

IP address of 837

Hi, I have an 837 which is running as (amongst other roles) the default gateway for the lan. We recently changed our la...
6 comments posted 19yrs
posted by anonymousgravy
6 comments posted 19yrs posted by anonymousgravy

ASA Stops passing traffic but does not crash

Has anyone ever had this issue? I have an ASA 5510 that periodically stops passing traffic. It does not crash. It think...
0 comments posted 19yrs
posted by garris_b2000
0 comments posted 19yrs posted by garris_b2000

SNMP Traps to Syslog with increased severity

Does anyone know of a way that SNMP traps can be sent to syslog with an increase of severity? SNMP is currently generat...
1 comments posted 19yrs
posted by nicholas.schmidt
1 comments posted 19yrs posted by nicholas.schmidt

Trunking on a 870 series.

Hi guys, do you know if on a trunk port it is possible to disable the default VLAN? As far as I know it is also tied to...
3 comments posted 19yrs
posted by am
3 comments posted 19yrs posted by am

How easy is it to set up CCME?

Any responses appreciated. I have been a CCNA for a few years and manage our office routers for WAN and LAN routing. I...
0 comments posted 19yrs
posted by symboliser
0 comments posted 19yrs posted by symboliser

VPN tunnel match list overlaps local LAN

Hi, We have four offices which use various subnets under 10.0.0.0/16, these are connected with a fully meshed VPN netwo...
0 comments posted 19yrs
posted by james
0 comments posted 19yrs posted by james

SSL for OWA

Hi, I am trying to configure one of our customer'sPIX firewall's to allow SSL OWA (they are currently using http, not h...
8 comments posted 19yrs
posted by kamen.rashev
8 comments posted 19yrs posted by kamen.rashev

Tunnels accesing other tunnels on concentrator

Hi. We have a lot of users accessing a Concentrator using Cisco 831 and 851 routers and ezvpn-configuration. Currently...
0 comments posted 19yrs
posted by ljorg6
0 comments posted 19yrs posted by ljorg6

Pix 7.2.1 Radius filter-id

I upgraded my Pix 515e from 6.3.4 to 7.2.1 but the dynamic acl filter does not work more. I use Win2k IAS radius to aut...
2 comments posted 19yrs
posted by fferrari
2 comments posted 19yrs posted by fferrari