Latest threads in Cisco Systemsshow only best voted threads
| Subject | Author | Posted | Replies | |
|---|---|---|---|---|
|
|
cisco access point
HI, I have configured the 1200 access point with static ip address .wep key enabled and mac address filtering when ever i am trieing to access wifi i wiill not get the IP .IF i removed the mac...
9
|
17 years ago
|
9 | |
|
|
CCNA Update
New Reference Material added for BOSON CCNA including Routing Configuration and Networking Protocols http://it-techexperts.com/CISCO/Cisco.asp
—
|
17 years ago
|
— | |
|
|
outbound VPN access through PIX with fixup pptp
I am having problems connecting to a client's site using windows VPN through a cisco PIX 506e. After some searching I found that I should have configured the following which I have: fixup protocol...
2
|
17 years ago
|
2 | |
|
|
Blocking arp based on ip address?
Hi, I know you can block arp on Switch based on Mac address, but can you block based on ip address? Does anyone know how? thx
1
|
17 years ago
|
1 | |
|
|
Min recommended flash in upgrade planner
Hi, I have a 837 with 12MB of flash and 64MB ram. I looked today at the upgrade planner, and in the upgrade for 12.4.13, it said the minimum recommended flash was 16MB, even though the file was just...
2
|
17 years ago
|
2 | |
|
|
Determining current VRRP Master router
How can I determine the IP Address of the current master router in a VRRP scenario? This would be the IP Address I could use for SNMP queries to that router. The virtual IP Address can't be used for...
2
|
17 years ago
|
2 | |
|
|
Easy VPN Server and Windows XP
Is it possible to use XP's VPN client to connect to a Easy VPN Server on a 2800? I can't seem to get it working. Kevin
1
|
17 years ago
|
1 | |
|
|
Same external IP Address for two devices
Hello all, I have a situation where our IT department has two Cisco 515e PIX (setup for fail-over) and now an internal server running GFI all resolving to the SAME external IP address (eg IP only...
7
|
17 years ago
|
7 | |
|
|
Cisco ADU 3.5 Debug logging
Does anyone know if the Cisco ADU 3.5 802.1x supplicant has any type of debug logging? If so, how is it enabled and where to the logs get saved? Thanks, Craig
—
|
17 years ago
|
— | |
|
|
AS5300 in POS environment
We have a AS5300 loaded with MICA modems and 4xT1 card. POS terminals dialup to the AS5300 and fork a telnet stream to a host target HOST_A on a specific port. Here is a snippet of how my lines are...
3
|
17 years ago
|
3 | |
|
|
Can't View Website from within LAN
Hi, For some reason, I'm unable to access my website from within my network. It works just fine from any computer outside the LAN, though. I can also view my website if I type the local IP address or...
9
|
17 years ago
|
9 | |
|
|
enable logging ::: ip access-list any any log
Yes. I have logging on Thanks
2
|
17 years ago
|
2 | |
|
|
Help, please with NM-2E2W not coming up (Details inside)
Hello everyone. I have a router I just bought that I installed a nm-2e2w into. The router recognized the module and the two ports. When a wic-1t is plugged into the module, it is recognized by the...
3
|
17 years ago
|
3 | |
|
|
No translation group found for tcp src dmz1 to an inside address
I am not too sure why I am getting this error. I have my PPTP client authenticating beautfully. I have assigned 192.168.102.0 to the RRAS server, this is the address range assigned to incoming PPTP...
1
|
17 years ago
|
1 | |
|
|
VPN connection between cisco pix 501 and sonicwall TZ170
Hi, When I try to create a VPN connection between a Cisco PIX501 and a Sonicwall TZ170, I keep receiving the error message : "crypto_isakmp_process_block:src:xx.xx.xx.xx, dest: xx.xx.xx.xx spt:500...
—
|
17 years ago
|
— |