Cisco Systems

[Cisco ISR 1800] Load Balance over two xDSL

Hi everyone, After reading many posts regarding this topic I've come to the conclusion that simply adding another route...

6 comments posted 18yrs

posted by iambigfish

6 comments posted 18yrs posted by iambigfish

Pix Firewall factory Deafult Reset

How can I reset my Pix Firewall 520 with IOS 5.1(5) to the factory defaults? I want this system to startup and perform t...

1 comments posted 18yrs

posted by scottburrows07

1 comments posted 18yrs posted by scottburrows07

Routing between two interfaces ISR 1801 issue

Hi, cant figure this out: I have two vlans: vlan1 192.168.1.1 vlan2 192.168.2.1 ip routing is on I have nat configured...

0 comments posted 18yrs

posted by corb

0 comments posted 18yrs posted by corb

Authenticate 5510 against AD

I'm pouring over the CLI guide for the ASA55xx but I'm not understanding what I need to do to authenticate using Active...

1 comments posted 18yrs

posted by ih8spam

1 comments posted 18yrs posted by ih8spam

BGP route selection - need help

Hi, My site has implemented BGP, two routers connecting with 2 different ISP (A & B), uneven bandwidth on these two lin...

2 comments posted 18yrs

posted by fogqb

2 comments posted 18yrs posted by fogqb

cisco 2801, ipsec problem with onboard accelerator

Hello! I need to connect two 2801 over fast ethernet with ipsec encryption. I also need ospf so I configuring gre over...

5 comments posted 18yrs

posted by dm

5 comments posted 18yrs posted by dm

port rate limit on 3750

Can a cisco 3750 (regular or Metro) switch be used to specify the speed for each sepparate port. If yes where can I fin...

5 comments posted 18yrs

posted by notimportant

5 comments posted 18yrs posted by notimportant

VPN 3005 and dyndns?

Still a newbie on this stuff....we're running a cisco VPN 3005 concentrator and have a small 5 PC office in Brazil. We'...

0 comments posted 18yrs

posted by noone

0 comments posted 18yrs posted by noone

CISCO PIX 501 and DHCP on outside port

Hello, I have an interesting problem I would like to solve and I hope someone her can assist me. I have a CISCO PIX 501...

1 comments posted 18yrs

posted by budman

1 comments posted 18yrs posted by budman

Cisco VPN client with SonicWall

Hi, I've seen mixed answers on this topic: is it possible to use Cisco VPN client with SonicWall firewalls? If so, has a...

3 comments posted 18yrs

posted by garyd

3 comments posted 18yrs posted by garyd

SIP Device behing PIX 501

I am having a problem with a SIP phone behing the PIX 501 using the broadvoice service. I can make calls fine but the p...

1 comments posted 18yrs

posted by davidrtk

1 comments posted 18yrs posted by davidrtk

Routing between subinterfaces

Good Day Everyone, My scenario is as follows. The setup involves 1 Catalyst 2950 1 Catalyst 3750G 1 ASA 5520 My objecti...

0 comments posted 18yrs

posted by tsookoo

0 comments posted 18yrs posted by tsookoo

dot1x authentication on windows xp and windows 2000 workstations

we're trying to test dot1x authentication on wired LAN and the set-up was already completed according to the cisco docu...

1 comments posted 18yrs

posted by u39193

1 comments posted 18yrs posted by u39193

Catalyst 3750 how to get multicast packets to go only to group member ports?

Hi, I'm thinking this is something simple, but I'm not very familiar with the configuration of Cisco switches / routers...

6 comments posted 18yrs

posted by tomwg123

6 comments posted 18yrs posted by tomwg123

VPN Issue - loosing more of my grey hair

PIX 515e v7.2(2) to Linksys BEFSX41 VPN Endpoint Error 713904 - IP = {my.home.ip}, Received encrypted packet with no ma...

3 comments posted 18yrs

posted by topher

3 comments posted 18yrs posted by topher