Cisco Systems

Help!

hi, I am implementing g.shdsl modem. Itesting my modem by doing internet on a leased line. The leased line provided by...

0 comments posted 18yrs

posted by mahendran.197

0 comments posted 18yrs posted by mahendran.197

Routing Issue

Hi all This is part a Cisco problem / part a Netscreen issue I think I have installed a Netscreen 25 to act as a backup...

0 comments posted 18yrs

posted by scootyjthompson

0 comments posted 18yrs posted by scootyjthompson

Cisco ASA 5510 to Cisco PIX 506E VPN Tunnel, Dropping RDP

Hi All I have a customer that has been using a Cisco PIX 506E to Cisco PIX 506E site-to-site VPN tunnel that I set up a...

2 comments posted 18yrs

posted by andypatterson24

2 comments posted 18yrs posted by andypatterson24

NAT woes Cisco 1800

Here is a problem that I've got. Our office is using a 1800 series router for the LAN and we are using a mixture of DCH...

1 comments posted 18yrs

posted by dgh94703

1 comments posted 18yrs posted by dgh94703

ASA split tunnel problems

hello, I have the following configuration Internet---- 131.153.x.222 outside[ASA 5505]inside 192.168.1.1--- my inside n...

2 comments posted 18yrs

posted by rj45

2 comments posted 18yrs posted by rj45

catalyst 2950, access list, dhcp

Hello! I need to set ip access-group on 2950 interface, so workstation will have access only to some addresses. It work...

11 comments posted 18yrs

posted by dm

11 comments posted 18yrs posted by dm

supernetting with dhcp on asa

hi, is it still impossible to set up dhcpd on a ASA 5520 with a network, say, 192.168.10.0/23? the interface *is* set o...

0 comments posted 18yrs

posted by lars

0 comments posted 18yrs posted by lars

Problem with SSL Services Module

Hi all, I have one Catalyst 6500 Series with CSM and SSL Services Module. When I am connecting to SSL module whit seria...

2 comments posted 18yrs

posted by testab

2 comments posted 18yrs posted by testab

NTP Server on a Cisco Router

HI All, Which is the smallest Cisco router that can be configured as an NTP Server? Can i configure an 1800 or worse an...

7 comments posted 18yrs

posted by mysnowy

7 comments posted 18yrs posted by mysnowy

Cisco PIX to PIX VPN issue

I have a client with two locations that I'm setting up a a point-to- point VPN. The tunnel was up and idle earlier toda...

1 comments posted 18yrs

posted by mjwidell

1 comments posted 18yrs posted by mjwidell

BGP static route from ISP and redistribute into OSPF

Greetings from NYC... I am testing out a scenario that involves BGP peering but instead of getting a full routing table...

12 comments posted 18yrs

posted by alejabad

12 comments posted 18yrs posted by alejabad

Question

Hi, Currently I have 2 X T-1 multilink'd into a Cisco 2811. I just ordered a new 10MB Metro Ethernet circuit. Would you...

2 comments posted 18yrs

posted by cmahoney

2 comments posted 18yrs posted by cmahoney

Specify outbound IP

Hello all, I currently have the following: global (outside) 1 XX.XX.XX.2 nat (inside) 1 0.0.0.0 0.0.0.0 So right now wh...

1 comments posted 18yrs

posted by dmurray14

1 comments posted 18yrs posted by dmurray14

multiple internet gateways

Can the ASA 5510 be somehow configured to use two internet gateways on its outside interface? I want to have a portion...

2 comments posted 18yrs

posted by plecki3

2 comments posted 18yrs posted by plecki3

QoS for IPSEC encrypted GRE tunnel

Hi, I have an DSL router connected to a central site via a GRE tunnel. The tunnel is encrypted by IPSEC and works fine....

0 comments posted 18yrs

posted by erikmolenaar

0 comments posted 18yrs posted by erikmolenaar