Cisco Systems

  1. Home
  2. Cisco Systems
14701 Threads Posts
to

Configuring Cisco for LACP and Trunking?

We're trying to configure our Cisco 4507 to allow a new Dell server with a pair of Broadcom Gig NIC's to aggregate its...
2 comments posted 18yrs
posted by usenet
2 comments posted 18yrs posted by usenet

802.1x with ACS and Third Party Switch

I want do use the Cisco ACS for 802.1x authentication with a Third Party Switch (Alcatel). With a Cisco switch everythi...
0 comments posted 18yrs
posted by no
0 comments posted 18yrs posted by no

SPAN port on Cat 4006

Hi Group, I am trying to setup a SPAN port on a Cisco Cat 4006 running CATOS, however when I establish the SPAN port it...
3 comments posted 18yrs
posted by Artie
3 comments posted 18yrs posted by Artie

Strange Cisco 2801 boot problem

Hi! I changed compoactflash cards on one of our cisco 2801's power connected trying to get a 512MB card partitioned to...
2 comments posted 18yrs
posted by muusitalo
2 comments posted 18yrs posted by muusitalo

Error : memory requirements exceed available memory

Hi, everyone... I was using my Cisco and it was disconnected. But two days later, when I tried to turn it on again, now...
0 comments posted 18yrs
posted by ramon_batista
0 comments posted 18yrs posted by ramon_batista

Backup Satellite connection

I work for a company that has several thousand stores and in an effort to get them off of dialup, we've designed a conf...
17 comments posted 18yrs
posted by mel.chandler
17 comments posted 18yrs posted by mel.chandler

Port Mapping on a PIX 515

Hello. I would like to be able to map a Public IP's port to a different port on a Private IP through the PIX 515. For e...
7 comments posted 18yrs
posted by corbinoreilly
7 comments posted 18yrs posted by corbinoreilly

Need to get detail on traffic on Catalyst 4500

I've got several remote sites using catalyst 4500s that have been showing some unusual traffic lately. I'm trying to fi...
5 comments posted 18yrs
posted by pfisterfarm
5 comments posted 18yrs posted by pfisterfarm

Bgp - set as path

i am aware that A BGP speaker can influence the best path selection by a peer by varying the length of the autonomous s...
2 comments posted 18yrs
posted by mmark751969
2 comments posted 18yrs posted by mmark751969

ospf design questions

want to segregate corp and prod networks. initially have planned multiple domains, two area 0s under different processe...
3 comments posted 18yrs
posted by billf
3 comments posted 18yrs posted by billf

Router vs. Telco DSL Quality Stats

Hi, We have been having an on-going battle with several local telcos over DSL line quality. For some reason their teste...
7 comments posted 18yrs
posted by Jon.R.Kibler
7 comments posted 18yrs posted by Jon.R.Kibler

Dropping Packets on a 2621XM

I have been getting drops on the serial port of this router. I talked to Cisco Tech Support. They suggested changing th...
7 comments posted 18yrs
posted by naves.tom
7 comments posted 18yrs posted by naves.tom

dhcp problem on 2960 switches

Hi All I need your help We have a dhcp server that was connected to Cisco 2960 which in turn was connected to alcatel s...
3 comments posted 18yrs
posted by info
3 comments posted 18yrs posted by info

VPN-client behind a Pix 515

Hello, from within our LAN we would like to connect to some remote destination using Cisco's VPN-client software (lates...
1 comments posted 18yrs
posted by gartmann
1 comments posted 18yrs posted by gartmann