Cisco Systems

Getting router to talk to client subnet/VLAN

Having a routing problem I need help with: * All my routers and switches are on 172.16.0.0/23, VLAN 2 (mgmt vlan) * My...

3 comments posted 17yrs

posted by nntp

3 comments posted 17yrs posted by nntp

USB Sticks bigger than 256 MB for Cisco 2811 ?

Hello, is it possible to use Memorysticks bigger than 256 MB on the USB ports of the Cisco 2811 ? Maybe upgrading the bo...

0 comments posted 17yrs

posted by georg.dingler

0 comments posted 17yrs posted by georg.dingler

Catalyst 4500 Redundancy

We currently have a single Cisco Catalyst 4510 with dual supervior IV modules and dual power supplied. It's central to...

6 comments posted 17yrs

posted by PurpleServerMonkey

6 comments posted 17yrs posted by PurpleServerMonkey

RIP not working on 2821/12.4.20T

Hello, if i configure rip on a 2821 box there`s not error message. But RIP doesn't work, and the configured lines are no...

7 comments posted 17yrs

posted by karstenf

7 comments posted 17yrs posted by karstenf

CiscoWorks LMS 3.0 installation

Hi, We have CiscoWorks LMS 3.0 running in evaluation license mode on an HP server with 4GB physical RAM, quad core and...

0 comments posted 17yrs

posted by njwhitworth

0 comments posted 17yrs posted by njwhitworth

Cisco Networks Management Utilities

HI ,,, all. Iam Cisco Certified Network Professional (CCNP). Iam seeking job now so I want alist of cisco management ut...

3 comments posted 17yrs

posted by Cisco.ahmed

3 comments posted 17yrs posted by Cisco.ahmed

Portfowarding on Cisco 1800

Hello, Network setup is as follows. Cisco 1800 with one public IP on the ATM interface. The ethernet interface has a 19...

4 comments posted 17yrs

posted by lyle.curtz

4 comments posted 17yrs posted by lyle.curtz

ASA, static, icmp and inspect FTP

Hello, I have an ASA box running 7.2 with few static and few questions.. Let's say that the outside IP address is 85.1....

1 comments posted 17yrs

posted by bin

1 comments posted 17yrs posted by bin

Certificate based VPN

Hey I have a question regarding setting up a certificate based VPN with a pix running the 7.04 software. Currently I ha...

0 comments posted 17yrs

posted by jtrooney

0 comments posted 17yrs posted by jtrooney

Layer 3switches

Hello I have and ADSL connection with 8 public IP's Can I use a Cisco layer 3 switch to NAT one of the public IP's to a...

2 comments posted 17yrs

posted by np121

2 comments posted 17yrs posted by np121

6500 Software for redundant sup32 setup

I see Modular and non-modular images. Looking at this doc I'd like to confirm if it is referring to the same "modular"...

3 comments posted 17yrs

posted by billf

3 comments posted 17yrs posted by billf

New BGP setup

I am trying to set up a new BGP config. Very basic. We will have two T-1's from two different ISPs. This is a 2811, ver...

4 comments posted 17yrs

posted by gordon

4 comments posted 17yrs posted by gordon

What's better a few big subnets or several smaller subnets?

I am eventually switching paths to the Inet. I have a 2nd PIX firewall and the connection has tested well through it. O...

8 comments posted 17yrs

posted by jfalken

8 comments posted 17yrs posted by jfalken

EtherChannel: Cisco-proprietary hash algorithm

Hello folks I have been implementing an EtherChannel on my 3750E switches based on source/destination IP address hashin...

4 comments posted 17yrs

posted by miguelsanders

4 comments posted 17yrs posted by miguelsanders

Newbie: cisco 851 configuration

Hello I have a problem with configuration that router via sdm. I have lan with 5 computers connected to switch, switch...

0 comments posted 17yrs

posted by p0r

0 comments posted 17yrs posted by p0r