Cisco Systems

  1. Home
  2. Cisco Systems
14701 Threads Posts
to

firewall ASA and routing header type 2

Hi, I'm using an up-to-date ASA firewall and I would like to let Mobile ipv6 go through it. To do that properly, I need...
0 comments posted 17yrs
posted by no-reply
0 comments posted 17yrs posted by no-reply

PIX/ASA and ipsec compression

Hi, is it right that the Pix or ASA doesn't support compression for ipsec? Helmut
1 comments posted 17yrs
posted by no
1 comments posted 17yrs posted by no

switch not posting

Hi I have an old 3512XL switch, when powered on the system light goes amber, all the ports go green except for port 1 w...
4 comments posted 17yrs
posted by die.spam
4 comments posted 17yrs posted by die.spam

Where best to place DHCP

Hello all. In the process of reworking our network. In the past I have always placed the DHCP server on the switch cont...
5 comments posted 17yrs
posted by skymax_taf
5 comments posted 17yrs posted by skymax_taf

PIX packets get NATed which shouldn't

A PIX 501 Version 6.3 managing an IPSec tunnel to an ASA 5510 seems to to source NAT on outgoing packets which accordin...
0 comments posted 17yrs
posted by ts-usenet0808
0 comments posted 17yrs posted by ts-usenet0808

PIX to ASA IPSec SA mixup

An IPSec tunnel between a PIX 501 Version 6.3 (phnx-bn-gw) and an ASA 5510 Version 7.2 (vcservnet-gw) frequently produc...
0 comments posted 17yrs
posted by ts-usenet0808
0 comments posted 17yrs posted by ts-usenet0808

Mixed WIC cards in same router

Hi all, In my follow up about T1 bonding (3MB in specific), can I mixed 2 different WIC cards to be use on the same rou...
3 comments posted 17yrs
posted by bavien
3 comments posted 17yrs posted by bavien

BGP partial routes

We are preparing new hw that will allow us to receive bgp routes =96 currently we=92re just broadcasting. However, we k...
5 comments posted 17yrs
posted by billf
5 comments posted 17yrs posted by billf

DHCP IP for Port-security

Hi, All, Today, I tested the "port-security" in cisco switch: I configured a switch port with port-security with static...
1 comments posted 17yrs
posted by bensonlei
1 comments posted 17yrs posted by bensonlei

Pix 506 - Fixup SMTP

Hi all, Can anyone explain me what smtp fixup is usefull for ? When will I have to activate it, what will it change ? So...
5 comments posted 17yrs
posted by ch.pin
5 comments posted 17yrs posted by ch.pin

Bonded T1 with 1720 or 2620

Need recommendation on which router to use: Currently running a T1 line with Cisco 1720 router (32MB DRAM and 8MB Flash...
7 comments posted 17yrs
posted by bavien
7 comments posted 17yrs posted by bavien

Does the PIX have route map functionality?

Our PIX is the def gtwy on our internal network, yet we have an Ironport e-mail appliance that we want to also use on o...
6 comments posted 17yrs
posted by drstigall
6 comments posted 17yrs posted by drstigall