hi,
ik have found a pix 501 (6.3) and want to use that for my starting business.
What is my situation:
Cable Modem: Connection Type Dynamic Subnet mask 255.255.255.0 Wan IP 83.217.232.133 Default gateway 83.217.232.1 DNS Address 213.73.255.52
Internal LAN:
192.168.0.0/24PIX 501 192.168.0.1 Accesspoint 192.168.0.50 SBS 2K3 Server 192.168.0.100 DHCP 192.168.0.10 - 192.168.0.49 DHCP VPN 192.168.0.200 - 192.168.0.205
I need to hav my config so that the following ports are redirected to the .100: (NAT) HTTP HTTPS POP3
444 5721 RDPOutbound must be allowed:
DNS HTTP HTTPS SMTP POP3 SSH TELNET ICMP
5721 8089 8090 RDPAnd the VPN Users must be allowed to the 192.168.0.100 server.
I anyone capable of explaining me how to go about this?
Frank