I have two switches, a 3524 and a 2960. Each switch is configured with the same VTP domain, same VTP domain password, etc. When I connect the 2960 to the 3524 via fiber the vlan information doesn't get passed on to the 2960. The gig ports are setup to do trunking and are both using the dot1q encapsulation.
I am also running into the same problem when connecting the 2960 to a6509.
I have been successful at connecting the 2960 to a 2950 with the same setup, using the same configuration on the 2960 (as I am with connecting it to the 6509 & 3524). When connected to a 2950 via fiber the 2960 does get the vlan informaiton.
Here are the versions of IOS I am running:
WS-C6509 = Cat OS 6.4(12) WS-C3524-PWR-XL = 12.0(5)WC10 WS-C2960-24TC-L = 12.2(25)SEE2 WS-C2950SX-24 = 12.1(19)EA1c
Can anyone shed some light on this issue for me?