Updating 2900 switch

What does following message mean, which was at the end of the update?

C2900XL INIT: Complete

00:00:42: %SYS-5-CONFIG: Configured from NVRAM by console 00:00:42: %SYS-5-RESTART: System restarted -- Cisco Internetwork Operating System Software IOS (tm) C2900XL Software (C2900XL-C3H2L9S-M), Version 12.0(5)WC17, RELEASE SOFTWARE (fc1) Copyright (c) 1986-2007 by cisco Systems, Inc. Compiled Tue 13-Feb-07 15:28 by antonino 00:00:42: %IMAGE_MISMATCH-3-MALIBU_IMAGE_MISMATCH: LRE firmware not supported by switch hardware. Please download a non-LRE image.
Reply to
Tom Linden
Loading thread data ...

You downloaded an image for an LRE switch which is a long reach ethernet switch... You need an image for a regular 2900XL...

Reply to
baggins

Tom,

It looks like you downloaded wrong image. Cisco has various "flavors" of

2924 switches, including LRE (Long Reach Ethernet) version. You should download the latest IOS for 2900XL (2924XL) switch.

Good luck,

Mike CCNP, CCDP, CCSP, Cisco Voice, MCSE W2K, MCSE+I, Security+, etc. CCIE R&S (in progress), CCIE Voice (in progress)

------ Headset Adapters for Cisco IP Phones

formatting link
formatting link

Reply to
headsetadapter.com

Cabling-Design.com Forums website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.