switch / ping

My router 877 has 4-port switch. Interfaces fa0 to fa3 has the same settings no ip address no cdp enable

and VLAN 1 has interface Vlan1 description $ETH-SW-LAUNCH$$INTF-INFO-HWIC 4ESW$$ES_LAN$$FW_INSIDE$ ip address 192.168.1.1 255.255.255.0 ip nat inside ip virtual-reassembly ip route-cache flow ip tcp adjust-mss 1452

My two PCs connecting fa 0 and fa 1 have ip 192.168.1.2 and 192.168.1.3 ( from DHCP of this router ). These two PCs can ping 192.168.1.1, can go to the Internet but they can not see each other.

From the router, I can not ping either of them.

There is no firewall on either PC or the router.

Any advice is greatly appreciated.

DT

Reply to
dt1649651
Loading thread data ...

Ahh ... and the answer is : it is the VPN Client installed on these two PCs has the option "Stateful Firewall" on.

It seems a PC now has two many firewalls :)

DT

Reply to
dt1649651

Cabling-Design.com Forums website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.