Hi, Can anybody shine light on load balancing 2 FR circuit going from cisco to cisco both with 2 serials wics. I was reading a couple of posts and MLPPP seems to be out of the question. Thanks,
- posted
18 years ago
Load Balance 2 FRAME RELAY CIRCUITS
Loading thread data ...
- Vote on answer
- posted
18 years ago
W artykule bvlmv napisa³(a):
per-packet load balancing is also a good solution.
TP
- Vote on answer
- posted
18 years ago
apisa?(a):
If I may add, per-packet or per-destination load balancing could be much=20 better than MLPPP specially if you have limited bandwidth since MLPPP=20 adds significant overhead and some other problems which might or migh=20 not be related to your envirnoment.
--=20 Ivan
*** User rot13 to see my eMail address ***- Vote on answer
- posted
18 years ago
Call your provider and ask about MLFR.
Think "IMA for the cheapo in all of us"
Jonathan
- Vote on answer
- posted
18 years ago
I work for the provider. My temp problem was that our atm switches only have frame to atm, but I tried circuit emulation to atm and I was able to get across the cisco's with ppp interfaces. Could you send me info/link on per-packet load balacing IMA was pretty much out of the question because IMA cards were not part of the project.
Thanks for the reply.