I just got a 2514 router off ebay. In the process of configuring the router The system never reach a point to ask me to turn on IP routing. The router is not saving the interface configurations. The system continues to give me the error messages listed below.
What can I do to stop this??
cis2514# %Error opening tftp://255.255.255.255/network-confg (Timed out) %Error opening tftp://255.255.255.255/cisconet.cfg (Timed out) %Error opening tftp://255.255.255.255/cis2514-confg (Timed out) %Error opening tftp://255.255.255.255/cis2514.cfg (Timed out) cis2514#
Below is the Config listings Configuration register is 0x2102
cis2514# cis2514#sh config Using 955 out of 32762 bytes ! version 12.0 service config service timestamps debug uptime service timestamps log uptime no service password-encryption ! hostname cis2514 ! enable secret 5 $1$hL2K$XNmdG1NEQTp/Fja1hWeTK0 enable password huntley ! ip subnet-zero no ip routing ! ! ! interface Ethernet0 no ip address no ip directed-broadcast no ip route-cache no ip mroute-cache shutdown no cdp enable ! interface Ethernet1 no ip address no ip directed-broadcast no ip route-cache no ip mroute-cache shutdown no cdp enable ! interface Serial0 bandwidth 64 ip address 192.168.15.1 255.255.255.0 no ip directed-broadcast no ip route-cache no ip mroute-cache no fair-queue clockrate 64000 ! interface Serial1 bandwidth 64 no ip address no ip directed-broadcast no ip route-cache no ip mroute-cache shutdown clockrate 64000 no cdp enable ! ip classless ! ! line con 0 exec-timeout 0 0 transport input none line aux 0 line vty 0 4 password howard login ! end
cis2514#sh ver Cisco Internetwork Operating System Software IOS (tm) 2500 Software (C2500-IO-L), Version 12.0(28d), RELEASE SOFTWARE (fc1) Copyright (c) 1986-2005 by cisco Systems, Inc. Compiled Fri 19-Aug-05 17:57 by pwade Image text-base: 0x03032930, data-base: 0x00001000
ROM: System Bootstrap, Version 11.0(10c), SOFTWARE BOOTFLASH: 3000 Bootstrap Software (IGS-BOOT-R), Version 11.0(10c), RELEASE SOFT WARE (fc1)
cis2514 uptime is 1 hour, 44 minutes System restarted by power-on System image file is "flash:c2500-io-l.120-28d.bin"
cisco 2500 (68030) processor (revision L) with 6144K/2048K bytes of memory. Processor board ID 12090325, with hardware revision 00000000 Bridging software. X.25 software, Version 3.0.0.
2 Ethernet/IEEE 802.3 interface(s) 2 Serial network interface(s) 32K bytes of non-volatile configuration memory. 8192K bytes of processor board System flash (Read ONLY)Configuration register is 0x2102
cis2514# Howard Huntley Jr. MCP, MCSE Micro-Computer Systems Specialist