Here is my current "show configuration" . Would there be any way to configure my router to replace the Bellsouth Westell modem just for the puprose of practicing the configuration of devices?
jerusalem#sh conf Using 1194 out of 32762 bytes ! version 12.0 service timestamps debug uptime service timestamps log uptime no service password-encryption ! hostname jerusalem ! enable secret 5 $1$J3g6$CGVI5R9OT4Q2JxGsA4xqS0 enable password freebsd1 ! ip subnet-zero no ip domain-lookup ip dhcp-server 192.168.2.1 vpdn enable ! ! ! interface Ethernet0 ip address 192.168.2.2 255.255.255.0 no ip directed-broadcast no ip mroute-cache no cdp enable ! interface Ethernet1 ip address 10.0.0.1 255.0.0.0 no ip directed-broadcast no ip mroute-cache no cdp enable ! interface Serial0 no ip address no ip directed-broadcast no ip mroute-cache shutdown ! interface Serial1 no ip address no ip directed-broadcast no ip mroute-cache shutdown no cdp enable ! ip classless ip route 0.0.0.0 0.0.0.0 Ethernet0 ip route 0.0.0.0 0.0.0.0 Ethernet1 ip route 0.0.0.0 255.0.0.0 Ethernet0 ip route 10.0.0.0 255.0.0.0 Ethernet1 ip route 192.168.1.0 255.255.255.0 Ethernet0 ip route 192.168.80.0 255.255.255.0 Ethernet0 ! snmp-server community public RO ! line con 0 exec-timeout 0 0 password cisco logging synchronous login transport input none line aux 0 line vty 0 password cisco login line vty 1 4 password freebsd1 login ! end