Hi
anyone know if they have a solution for get the Ethernet trame of a ATM link and transport this to another routers ?
First router (A): Cisco 7204 with ATM
interface ATM2/0 bandwidth 155000 no ip address load-interval 30 atm sonet stm-1 no atm ilmi-keepalive
interface ATM2/0.650 point-to-point ip address 172.20.8.9 255.255.255.252 atm route-bridged ip pvc ATMLINK 1/850 vbr-nrt 2048 2048 1 oam-pvc manage encapsulation aal5snap
Actually, the link end are the atm router ...
i want delete the IP Address, get the ethernet trame and use Xconnect to sent the trame at a other router.
It's possible ?
Router Customer 172.20.8.10/30 == ATM ==> Router A == Ethernet over MPLS xconnect ==> Router B == Vlan 250 => Router Customer B 172.20.8.9/30
Thanks for your help Mag