Cisco 1760 FXO Interfaces

I have a Cisco 1760 Series router with a 2x FXO Modular Voice adapter card installed.

The IOS Image is c1700-advipservicesk9-mz.124-13b.bin.

Can someone point me in the right direction? I would like to be able to connect my PSTN POTS phone line to this card and then use either a soft phone, ATA, or VOIP phone through ethernet.

A simple configuration example for my scenario would also be appreciated.


Reply to
Loading thread data ...

This seemed to have worked. I am just using a standard SIP soft-phone to test.

voice-port 2/0 ring number 2 cptone CA caller-id enable ! dial-peer voice 1 pots destination-pattern .T port 2/0 ! sip-ua nat symmetric check-media-src !

"jego" schrieb im Newsbeitrag news:4Lmfi.58044$NV3.24248@pd7urf2no...

Reply to
jego Forums website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.