Alignment Error Exception on Cisco 827

M. Hamzah Khan · 2007-12-18T17:24:50+00:00

Hi everyoneI have a Cisco 827, and for the last few days, It has been crashing withan error saying "Alignment Error Exception". I haven't changed the IOSor anything, I've hardly touched it, so I really can't think what hasmade this happen. I tried putting the IOS onto it again, but nothingchanged, I also tried "ignoring" the configuration file.Anyone have any ideas? I've pasted all the output of it starting below:System Bootstrap, Version 12.2(11r)YV6, RELEASE SOFTWARE (fc1)Technical Support: (c) 2006 by cisco Systems, Inc.C800/SOHO series (Board ID: 9-62) platform with 32768 Kbytes of main memoryprogram load complete, entry point: 0x80013000, size: 0x615e4cS*** Alignment Error Exception ***PC = 0xfff40050, Vector = 0x600, SP = 0x81fffe58*** Software Emulation Exception ***PC = 0xfff40000, Vector = 0x1000, SP = 0x81fffe48monitor: command "boot" aborted due to exceptionSystem Bootstrap, Version 12.2(11r)YV6, RELEASE SOFTWARE (fc1)Technical Support: (c) 2006 by cisco Systems, Inc.C800/SOHO series (Board ID: 9-62) platform with 32768 Kbytes of main memoryrommon 1 >- --M. Hamzah KhanWebsite:

Dec 18, 2007 3 Replies

Rate this thread:

M. Hamzah Khan 18 years ago

Vote

�

Łukasz Bromir 18 years ago

"Alignment Error Exception" -> search box on cisco.com, first hit.

Vote

Merv 18 years ago

Alignment errors are caused by a software bug.

You should get a newer version of IOS for the router

Vote

M. Hamzah Khan 18 years ago

Vote

Join the Discussion

Have something to add? Share your thoughts — no account required.

Didn't find your answer?

Ask the community — no account required