Is there a way to tell the speed of the ADSL connection on an 837? sh int doesn't seem to give it.
JR
Is there a way to tell the speed of the ADSL connection on an 837? sh int doesn't seem to give it.
JR
Yes, in enable mode execute:
show controllers | begin Interleave
for something like that:
Interleave Fast Interleave Fast Speed (kbps): 0 640 0 160 Reed-Solomon EC: 0 0 0 0 CRC Errors: 0 0 0 0 Header Errors: 0 0 0 0 Bit Errors: 0 0 BER Valid sec: 0 0 BER Invalid sec: 0 0
First figure (640kbit/s) is downstream, second (160kbit/s) is upstream. Also note, `sh int atm0' will give You accurate upstream bandwidth:
ATM0 is up, line protocol is up Hardware is PQUICC_SAR (with Alcatel ADSL Module) MTU 1500 bytes, sub MTU 1500, BW 160 Kbit, DLY 80 usec, ^^^^^^^^^^^
sh dsl int atm0
Cabling-Design.com Forums website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.