Hi,
my English is not best. I hope you could understand.
I had install a Windows Server 2003 Server for Radius. On Internet Authentication Service I added Cisco 1131AG as Client...
My Windows XP Clients could connect to the Radius Server over the Accesspoint, but the can not recieve an IP-Address from DHCP Server, which is installed on the Server, too.
I can not find Information on the www. I search about 3 hours. Could anybody help me?
post the config and the output of show version
If the DHCP server is not on the same subnet as that to which the FastEthernet interface of the access point is connected, then the DHCP requests which are send out the IP broadcast address will not be forwarded to the DHCP server.
The router that is doing the forwarding for that subnet would have to be configured with
ip helper-address
on the interface that connects to the same subnet as the access point
Have something to add? Share your thoughts — no account required.
Ask the community — no account required