Latest threads in Nortel Networksshow only best voted threads

Subject Author Posted Replies
 
deregister dn?
logging on to BCM 3.6 table no longer populates for IP terminals, how do I get table to display registered but inactive dn's so I can release these?
 
Nortel CICS 6.1
Hi. I have a Nortel CICS system running 6.1 software. The system has 1 internal ATA and 1 external ATA used for credit card machines to dial out. Currently, the cc machines must dial 9 to get out. How...
7
7
 
PDT
I am looking for somebody that can assist me offline with retrieving the 2nd level password to a meridian 11c. I know the PDT password is a touchy subject, so we can take this offline. If anybody can...
3
3
 
Opt61c IVR integration with ISDN
Currently we are using Line Side T1s to integrate with our new 3rd party IVR system (Genesys formally Voice Genie product). We used to have a Peri IVR system. In order for our new IVR to run multiple...
1
1
 
470-48T switches can I do this?
Hello everyone, I have a stack of three 470-48T switches cascaded and I have a gigabit modual in switch 1 and 3 and I have a multi link trunck set up and two fibers going to my core from the switches....
9
9
 
Any1 using HDX and Installed SU06 for SCCS 5?
Hello everyone, We have recently applied SU06 to our SCCS 5.0 server and the result is it has destroyed out HDX link...... We use HDX to interface our Periphonics VPS to the SCCS. Just wondering if...
4
4
 
Nortel BCM 400 random reboot after error condition
I have a serious issue w/ my phone system. It's a Nortel BCM 400 still running 3.5 software. About once every 3 months it does a complete reboot, almost like a power cycle, shutting down all services,...
1
1
 
MICS 7.0 detects new T7208 phones as M7208 sets
We recently upgraded our KSU to the MICS 7.0 cabinet from an old 8x24 cabinet with DR5 software. We had all legacy M series phones, and slowly as they die I'm replacing with T series phones. My...
 
450 24T Pwr switch cascading problem lights blinking
I just added a 470 24 port switch to my existing 3 switch (450 series) configuration, the three 450's continue to work ok but the 470 doies not the Cas UP / Dn lights just blink all the time and they...
3
3
 
Nortel phone features
My office has about 40 computers/phones and we've all got Nortel 2002's in a simple setup. None of our phones have the Call Timer feature to show elapsed call time, but I would like to have this...
 
Adding a new cascaded switch
Hello, I now have 3 of the 450 switches cascaded, I would like to add to the stack a factory defaulted 470 switch. If I just add it to the bottom of the stack should it just pick up all info from the...
1
1
 
Nortel CMTS 1000 - passwor question
Hi all, does anyone know how to clear password on old Nortel CMTS 1000 unit? thanks in advance, b2rat2
 
VPN between nortel 1010 and linksys WRV200
For our new office in France, i'm trying to setup a VPN tunnel between the nortel and the linksys.. After working on this for almost 2 days, and getting error code's which aren't even in the linsys or...
 
Wich fiber connector do I need?
I just got a 1 PORT BASESX GBIC for my 470 switch. I need to know what connector to get for it. I think it is an SC anyone know for sure? I think I need SC to ST thanks
1
1
 
Symposium software
How buggy and prone to crashing is this software (assuming no hardware issues)? I ask only because I have noticed little inconsistancies since I have been using it and since I don't have a tonne of...
3
3