MICS 7.0 detects new T7208 phones as M7208 sets

We recently upgraded our KSU to the MICS 7.0 cabinet from an old 8x24 cabinet with DR5 software.

We had all legacy M series phones, and slowly as they die I'm replacing with T series phones.

My problem is that when I add a T7208 phone to the system, it is operating in Legacy mode (where the message indicator not working, and the little LCD icons for pickup, hold, etc are not functioning.

When I go into the set administration, the KSU seems to detect the hardware at that phone extension as M7208 instead of T7208.

We have 3 T7316 phones on the system that detect as a T series and all features work, so I know what the 7208 phones should be doing.

Any ideas?

Deacon Eisenhart Country Club of York

Reply to
Loading thread data ...

Cabling-Design.com Forums website is not affiliated with any of the manufacturers or service providers discussed here. All logos and trade names are the property of their respective owners.